Woodworking blog entries tagged with 'sharp'

  • Advertise with us
View Kelly's profile

Grinder and Beltsander Setup Gauges

02-14-2018 06:59 AM by Kelly | 3 comments »

When you sharpen your own chisels and wood turning knives, you’ll find it necessary to set your grinder or sander support table to different angles for different tools. Of course, you’ll find it necessary to repeat the previously set angle, to avoid removing valuable steel from the tools, and to get consistent cuts. Setting up a tool rest of a grinder or belt sander to grind a specific angle presents a challenge because you can’t use triangle templates (see first photo), angl...

Read this entry »

View mafe's profile

Carving tools #9: Sharpening on the go - small tin of what you need.

06-02-2016 11:54 PM by mafe | 13 comments »

Sharpening on the gosmall tin of what you need. I like to bring this small tin when I leave the workshop with sharp tools.More precise when I bring carving tools and a knifes on the go.It just joined me for a travel in Turkey and will again this summer. Yeps nothing fancy, just a a small mint tin. Here next to a Turkish pocket knife. Now open, you will be surprised how much a small tin can hold.What you see here are a flat and a round leather strap for honing. Finger protector (in...

Read this entry »

View A Slice of Wood Workshop's profile

Easily Sharpen Bandsaw Blades

01-10-2016 10:23 PM by A Slice of Wood Workshop | 1 comment »

Don’t waste money buying new bandsaw blades when you can just resharpen them. Thanks for checking it out. Make sure to subscribe!

Read this entry »

View Lazy_K's profile

sharpness: or how sharp is too sharp?

04-06-2014 02:39 PM by Lazy_K | 7 comments »

Sharpening: gives me headaches just thinking about it! Not because it is difficult! It is NOT! but it is the prime example of a place where every effort to “simplify” or make it easier has resulted in More confusion and More difficulty! it started at least 150 years ago with the first Victorian era quick and easy sharpening jigs and guides. and has gone rapidly downhill. Sharpening, you should do it once a day for every tool you used that day. at the end of the day put t...

Read this entry »

View Shawn Sealer's profile

TIW Ep. 51 Saw Sharping Part 2

03-14-2014 11:17 PM by Shawn Sealer | 1 comment »

Watch here Sharping a saw for the first time

Read this entry »

View Shawn Sealer's profile

TIW Ep. 50 Saw Sharping Building a Saw Vice Part 1

03-01-2014 04:09 AM by Shawn Sealer | 0 comments » Building a saw vice to sharping my saws

Read this entry »

View Tim Anderson's profile Which Tim Sharpens a Card Scraper.

01-10-2014 05:01 AM by Tim Anderson | 15 comments »

So, I’ve seen tons of videos, read more blog posts than I remember, and tried myself many times to follow all the different methods for sharpening a card scraper I’ve found online. After finally getting the hang of it, I wanted to post my simple no-nonsense method so you can all sharpen card scrapers with ease as well. It’s really quite a bit simpler than people have made it out to be. Required items:1. Unsharpened Card Scraper (If you don’t have this, why read t...

Read this entry »

View A Slice of Wood Workshop's profile

Shop Made Tool: Simple Made Marking Gauge

08-19-2013 04:13 AM by A Slice of Wood Workshop | 0 comments »

Don’t waste your money buying a marking gauge. Make your own gauge and use up some of those scraps in the shop. Please subscribe to my channel and share my videos. Click here to view video (videos still aren’t embedding).

Read this entry »

View pintodeluxe's profile

Sharpening Jointer Blades

07-14-2012 03:02 AM by pintodeluxe | 3 comments »

Fine Woodworking has a great article on how to sharpen jointer blades without removing them. You may need to be a member to access this link, but I highly reccomend subscribing.

Read this entry »

View PurpLev's profile

Work(shop) in Progress #17: Sharpening Station

10-28-2011 09:04 PM by PurpLev | 4 comments »

When I started working with bladed tools (chisels/planes/etc) I wanted a sharpening system that was on the cheap, small and storable and versatile. I chose to start with the scary sharp, and used sand papers from 100grit (rough shaping and cleaning nicked blades) to 2500 for final honing and green compound for touch ups. I added the Veritas MK-II honing guide and was using it for reshaping/resestting blades and honing them through the grits. While this method worked for the time I wanted s...

Read this entry »

1 2 next »
13 entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics