Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...
I am very sorry that the tutorial is still down. I lost all the pictures and just have moved on to other things. But the good news is that others have come to the rescue with their own tutorials and are just as good…even better than mine.Here is one by Scott http://lumberjocks.com/projects/58221Andy
Well, I was asked to put together a blog on how I made my segmentd ring. Since I had to make a new one for myself, (first one too small) I thought I would go ahead and do a step by step picture tutorial. My first time ever doing something like this , so hope it comes out OK. Here goes; Wood Selection The first step in making the ring is deciding what woods to use. As we all know, the selection is quite large. One of the most important things is color, but the most important is hardne...
I would like to start out by saying the projects listed on this site really show some of the best talent and creativeminds ever amassed on one website. Makes me jealous. Any way I have been asked to show how I make a Texas Star, so I decided to share this with everyone. There are a few things you need to make before starting. First thing is to make a pattern making fence for your table saw. It is real simple. I usually make mine 4-6 inches wide out of 3/4”plywood. Rip a scrap piece o...
Here is how I made my Intersected cutting board posted here. There seems to be a lot of interest in this board so here is a blog on how I made it. First of all here’s what I planned on making. It’s the top one. After I got both the circles intersected I liked how it looked with the rounded corners so I just added in the “wedge shapes”at the top and bottom and called it done. I think that it makes it very distinctive also. As one person guessed I ...
I have a love affair with wooden hinges and this challenge gave me the opportunity to go one step further with them. (It started some years ago when I came across the work of the late Tim Stead – in my opinion, a genius.) Accurately drilling the hinge pin hole in such a hinge is never easy, and those I planned for this box are 9.5” long and therefore impossible to drill. The following is an attempt to show how I overcame this bit of the challenge. The first shot shows the oak blan...
Updated 1/15/12 The “Art Box” concept came about when I was looking for a way to use small pieces of some figured Myrtlewood I had leftover, not large enough for a box, but not something I could not throw away either. I decided to feature it in the lid of a box, like a picture in a frame. Keep that picture frame in mind when selecting the small piece for the medallion. You might select that picture piece first and then find a less figured wood to use for the lid and body, one that sets it...
Updated 1/15/12 We now have our box assembled and glued up. Depending on the temperature, let it dry for a couple of hours, or overnight to be safe.Take the tape off and clean up any dried glue. This is a good time to smooth up the bottom to get rid of any rocking.You can double stick sandpaper onto a very flat and firm surface and slide the bottom across that. The problem with this approach is that sheet sandpaper is way too small. You can stick down several sheets and if you go very s...
Hi Everyone, this is my first time trying to do a blog. So please bear with me, I’ll do my best!I have had a lot of request to do a blog about my rings, I do 2 kinds of rings. The Lamination style and the Bentwood style, this blog is on the Lamination style. This ring is made out of Cocobolo, Brass and has a Mother- of-Pearl inlay. I start out with 3 thin squares of Cocobolo, about a 1.5”, I have a thin sheet of brass that I cut about the same size as the wood. I lay them out to o...
- My Journey As A Scroll Saw Pattern Designer - 1598 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1623 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 220 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries