The handle.I did not like how the handle was looking, it appeared to lack any of the swirling grain that the top inset panel has. That happens sometimes after shaping, the good stuff ends up on the floor. Also… if you look close, you will notice in the picture below that I sanded too deep into the right corner of the handle and exposed the spline! Oops! So I made a new one from Black Palm Wood, a first time for me. The black color ties in with the Wenge corner splines, plus I love ...
I need a small band saw 9” would suffice and my wife’s family sent me a couple hundred dollars to buy onenow I have the delima of which one to choose.Cant afford a 14” saw and the Skil and Craftsman are my two choices locally.I’m only going to be cutting thin plywood and 1” thick boards with it. Help I don’t know what to do!!!!!
Updated 1/15/12 We now have our box assembled and glued up. Depending on the temperature, let it dry for a couple of hours, or overnight to be safe.Take the tape off and clean up any dried glue. This is a good time to smooth up the bottom to get rid of any rocking.You can double stick sandpaper onto a very flat and firm surface and slide the bottom across that. The problem with this approach is that sheet sandpaper is way too small. You can stick down several sheets and if you go very s...
This is a router table I’m working on for my shop. I was able to incorporate most the features I needed and plan to use it often. It isn’t finished but most the major parts are in place. I purchased the Incra twin linear, router table top, woodpeckers router lift and the porter cable 7518 motor from Woodpeckers Inc back in 2002 or 2003. Finally, she’s in working order. Since the last post I was able to complete the rear ...
http://www.gallerypauleanglim.com/Beech.html#3 Time to re-focus and find my inner minimalist and sense of visceral elegance so my work brings in real money…
When my step daughter wanted to upgrade the fireplace mantle in her family room, we worked from a picture in a magazine she had, to come up with a design that was similar but would work in her room. We also added some crown molding and then repainted the room. Since all work was to be painted, we were able to fill screw holes and the saw kerfs we used to curve the crown molding. For filler we used Bondo, which while designed for the automotive industry, it is a great product for woodworker...
This board is not part of the 150.. I showed one of the 150 to a friend and she wanted one but a little larger,This is the way it was made.Cut some bits of board. NGR SA TBDress all sides.This is to see the way it will look with the stripe. Cut all pieces to 250 mm.Join the NGR and edge with TB on one and SA for the other.Glue a sacrificial board to the SA prior to cutting the arcs.This is the arc cutting jig.. a slight variation on the patron jigSet the stop with a nail… high tech I kn...
Well the rain finally stopped today and the sun came out. Looking out on my garden, the squirrels were making the most of it. I sat and watched this youngster somersaulting around the garden, before settling on a branch to devour his morning pine cone. Following his lead, I took the opportunity to get outside and sharpen another saw. Next up is the W. Tyzack, Sons & Turner No.120. Fourteen inches long with a .030” thick plate and an extra heavy spine. This is by far the heaviest ba...
Well folks! It’s finally done! This took a little longer than expected, because of the weather, & things. It’s amazing that it looks just like the SketchUp plan, but I think a tad better looking though. My Son, & his family really love it. It’s almost like a new room on their house. I also learned about the new way of staining treated lumber. They don’t recommend letting it dry out for 60 to 90 days. They say that if you treat it right a...
Hmm, where was I…O yes. The red material had arrived and so I laid it all out on the table to decide which one would go into the eye. There was Redwood burl, Amboyna Burl, Red Mallee Burl, Roble Burl, Red Swirl Resin, and Red Sea Coral. I chose the Red Sea Coral not just because of its color but because it came from the sea and I am sentimental, I thought it would be cool to have it in the “SEA Monster” :) It was a bit disappointing because when I sanded it flu...
- My Journey As A Scroll Saw Pattern Designer - 1190 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1212 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 206 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries