LumberJocks

Woodworking blog entries tagged with 'shaker bench'

  • Advertise with us
View cpine's profile

White Oak Benches for Kitchen Table

133 days ago by cpine | 4 comments »

I make some benches to be used with our kitchen table.A fun project that is not all that difficult. The benches turned out very sturdy and look great! Please watch and comment. Would love to hear what you all think. Thank you! http://youtu.be/nRKWt6uyClM Chris

Read this entry »


View Todd A. Clippinger's profile

Shaker Bench for Charity 2011 #4: Video Wrap-up of the Shaker Bench for Charity with Brian Havens

1221 days ago by Todd A. Clippinger | 15 comments »

Well Guys, I finally had an opportunity to sit down and edit a video that Brian Havens and I shot before he jetted back to his home in California. We had a great time working together on this project and it did well to support a local Billings organization that serves the developmentally disabled community. I also want to mention that a local LumberJock MTBrian also helped out and it was a good thing he helped what he did because we barely, just BARELY made it in time to the auction as ...

Read this entry »


View Todd A. Clippinger's profile

Shaker Bench for Charity 2011 #3: Shaker Bench Completed In Time (Just Barely!)

1233 days ago by Todd A. Clippinger | 20 comments »

Whew! That was a close one! Brian Havens and I worked on the Shaker Bench for Charity right up to the last minute. The social mixer and appetizers started at 6:00p.m. This was when the items went on view for both the silent and live auction. I was spraying the final coat of lacquer on the drawers at 5:50p.m. while Brian showered and changed. Then I showered and changed while Brian and my wife Rita loaded the bench in the vehicle. By the time I got dressed, the bench was al...

Read this entry »


View Todd A. Clippinger's profile

Shaker Bench for Charity 2011 #2: The Deadline Draws Near...

1236 days ago by Todd A. Clippinger | 14 comments »

Yikes! We are cutting this one close. The Shaker Bench for Charity is being constructed out of black walnut and it is gorgeous. But the drawback is that black walnut simply takes a bit longer to process than the cherry which all previous benches have been made of. When you multiply the extended processing time by several pieces it all starts adding up. Newspaper Coverage The Billings Gazette stopped out and took some photos and gave the story of our woodworking marathon for charity ...

Read this entry »


View Todd A. Clippinger's profile

Shaker Bench for Charity 2011 #1: Neck Deep in Woodworking...

1237 days ago by Todd A. Clippinger | 11 comments »

Shop Update- Fellow LJ member Brian Havens flew out from his home in California Tuesday night to help me build a Shaker Bench for Charity. I think he may have questioned this decision as he arrived here in Billings at 11pm and the temperature was -3°. SNAP! Immediately upon arriving to my place we went straight into the shop. The next couple of hours were spent talking about our shops and the differences. It was only after our voices were getting hoarse and eyes blurry from fatigue did we ...

Read this entry »


View Todd A. Clippinger's profile

A Woodworking Marathon for Charity

1239 days ago by Todd A. Clippinger | 7 comments »

OK guys – you don’t hear much from me because I am swamped with work. This takes me away from blogging and from sharing with woodworkers. So one of the things that it detrimentally impacted is my schedule to build a Shaker Bench for Charity. To compound my schedule dilemma I thought the auction was Saturday night and turns out it is Friday night. This morning I throw a Tweet out there asking where are all the woodworkers that want to help me just for free, just for the exper...

Read this entry »


View Todd A. Clippinger's profile

Design Thoughts on a Shaker Inspired Bench Video Re-edit

1741 days ago by Todd A. Clippinger | 15 comments »

I am not attempting to milk this out, but I was very unsatisfied with my edit job on the first release so I worked it over again. This version is actually 9 seconds shorter but I have added a handful of still images for close-ups to show more detail. This gives added value to the video as it provides greater visual information. This video is not about the how-to for constructing the bench. It really is about the design and thought process for creating it. I cover many of the design ele...

Read this entry »


View Todd A. Clippinger's profile

The American Craftsman WorkShop #7: Design Thoughts on a Shaker Inspired Bench

1824 days ago by Todd A. Clippinger | 24 comments »

A New Video!I am excited to get out another video. They take a lot of time to create and, thankfully, I have been busy this summer with my business but it hampers my ability to make videos! I am advancing in my skills and you will notice that I added photos documentary-style in this video (I love the Ken Burns effect.) Some Thoughts on Design and Construction The most difficult part of making furniture is creating the design. I share some of the thought process for creating my Shaker...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase