Until recently my lathe experience has been 50 or so pen/pencils, a few miniature goblets, and a couple small 5 inch bowls over the past few years on a Jet mini lathe, enough to want to try other lathe work. This past fall I was fortunate to have the opportunity to acquire a PM 3520B, but due to other work and priorities I’ve not had a lot of time to use it yet…and that’s “killing me”. So this blog documents what I consider my first significant lathe project. Recently a partially segmen...
I recently posted a project called “Milk Bottle Tops & Scrap Wood”, http://lumberjocks.com/projects/57351 There was some interest in the concept & some of you requested a blog on how they were done.So I thought I should get on with it before I forgot the whole process. LOLThe whole idea started from a need to cut down on all the scrap pieces of wood and composite material lying around in the shed.We all have those bits that we won’t throw out. They will come in ha...
After completing the Segmented Vessel, I decided I’d make the segments on my next piece a little thinner than the 3/4” previously used. Since we are all in the Christmas spirit, I thought I’d make a new ornament for our tree this year. The segments in this piece are 1/4” thick, and this piece includes a total of 92 segments. Here’s the before picture of the ornament blank glued up on the lathe. After turning, sanding and the first coat of wipeon polyurethan...
Technically, what I am working on here is a ‘Stave Bowl’ ... a bowl comprised of vertical staves (like a barrel) glued together before turning. This particular bowl will turn out to be about 7 1/2” in diameter and 2 3/4” tall. The bottom and vertical spacers are walnut, and the staves are maple. I used a software package ( WOODTurnerPro … http://woodturnerpro.com ) to calculate the cutting angles and dimensions for the staves and segments. I cut the staves ...
I have been studying segmented turning for a while. I have lots of small pieces of exotic lumber, a really good lathe, and seeking some out-of-the-ordinary projects less frequently seen. It was some You-Tube videos, a 90 yr old turner in North Carolina, who really made me conclude that this was something I could be doing! And so it began, two blocks of 10/4 maple, with a purpleheart filler. Next, some laminated beech, cherry and maple, and a pedestal made of salvaged yew from a neighbors t...
Day 1 project 1 of the June 2009 30 projects in 30 days Off to a positive start! I’ve completed my 14th segmented wine bottle stopper (shocker I know!). This stopper is a new pattern that I have named 1/2 & 1/2 Twist. here are the stopper stats:Total pieces: 121Wood: Red Leaf Maple & WalnutCap: SapeleDimensions: 2-1/8” tall, 1” diameterFinish: CA/BLO This stopper is available for sale through my Etsy storeserial # 2009-014
So after watching some videos on segmented bowl construction and turning, I decided to give it a shot while I wait for my cole jaws to arrive in the mail. I actually went to a lumber place and bought a few pieces: some walnut, alder, cherry, and something with the word “african” in it… maybe mahogany, but I’m not 100% sure. And then, after I got home, whinging internally about spending $40 on an amount of wood you could maybe build a desk for a barbie doll out of, ...
In taking a break from the wine bottle stoppers I’ve been making, I wanted to make something that I haven’t done yet. I’ve always been very impressed with the vessels that trifern has posted, so I thought I would start there. Now don’t go thinking that just because it’s not a wine bottle stopper that I’ll be turning a single piece of wood. Heck no, a segmenting we will go! This piece is 6” tall and about 3-3/4” in diameter at its wides...
So a few weeks ago I took a course on building segmented pens at my local Woodcraft. The class was very good and we came away with 4 different types; Celtic Knot, Spiderweb, Spiral Staircase, and a small piece of a Herringbone (which I am not sure I will be doing again) The Celtic knot is really the only one that was a complete blank and I decided to give it a try this morning before I started in on the other pens I am planning to turn this afternoon and through the weekend. Unfortunately it ...
This is the video link http://www.youtube.com/watch?v=RhwO5fW3YQQ
- My Journey As A Scroll Saw Pattern Designer - 1196 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 66 parts
- Sheila Landry (scrollgirl) - 1218 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 332 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries