LumberJocks

Woodworking blog entries tagged with 'scrollworking'

  • Advertise with us
View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #3: Applying the Pattern for Scroll Sawing

07-15-2011 10:28 PM by Sheila Landry (scrollgirl) | 50 comments »

I hope everyone was able to find the supplies that I suggested in the last part. If anyone had any trouble, please let me know, either through a personal message or on the comment section here and between myself and the others here, we should be able to help you. We are now ready to apply our patterns to the wood in preparation for cutting. But first of all you need a pattern. I have made up a sheet of some simple shapes that you can use as a practice scroll saw pattern. Just click on ...

Read this entry »


View KoryK's profile

Intarsia Basics #1: Introduction and Invitation to All.

03-18-2012 10:53 PM by KoryK | 41 comments »

Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...

Read this entry »


View Maveric777's profile

Uncharted Territory... My First Inlay & How I Did It

12-03-2010 03:47 PM by Maveric777 | 39 comments »

Well, I been hanging around here at Lumber Jocks for going on a year now. I have learned so much from so many, and can honestly say I owe a lot of what I know today to the sharing of knowledge here. So after attempting my latest “Exploration” into the wild world of woodworking I figured this would be a good a time as any for me to pass along a little blog on how I did my “Dreaded Inlays” ..... Long story short, I was hit up by a coworker asking me if I could build h...

Read this entry »


View OregonBurls's profile

How to find and harvest legal burls!

10-13-2009 05:44 PM by OregonBurls | 37 comments »

Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....

Read this entry »


View scrappy's profile

Making A Segmented Ring Without A Lathe / A Step by Step Tutorial

06-07-2009 09:15 PM by scrappy | 35 comments »

Well, I was asked to put together a blog on how I made my segmentd ring. Since I had to make a new one for myself, (first one too small) I thought I would go ahead and do a step by step picture tutorial. My first time ever doing something like this , so hope it comes out OK. Here goes; Wood Selection The first step in making the ring is deciding what woods to use. As we all know, the selection is quite large. One of the most important things is color, but the most important is hardne...

Read this entry »


View TJ65's profile

basket weave boxes

08-25-2010 11:56 AM by TJ65 | 35 comments »

Ok a little while ago I posted a project that was a box that was made to look like a basket weave. It is very striking to look at if you dont know how it is made and is really easy if you have a scroll saw. A few people were interested in the making of it so here goes- First thing first get yourself a pattern, there are a few books about making basket weave boxes. Or alternately you could make your own. Once you have a pattern- You need two different patterns( look closely as these are...

Read this entry »


View stefang's profile

HOW TO MAKE COLOR COPIES WITH YOUR BANDSAW

03-06-2013 06:22 PM by stefang | 32 comments »

Welcome to my shop. Yes, today I will show you how to make color copies with your bandsaw. 1. Just take what you want copied and place into your bandsaw blade like this. 2. Now push it slowly through to the other side of the blade like this. 3. Separate and now you have a perfect copy! Well, book matched anyway, nothing is perfect. This is the outcome after some hand sanding with 80 grit paper. I rubbed on some ethanol to bring out the colors, but it evaporated so ...

Read this entry »


View rustfever's profile

NEW INFORMATION California meeting

10-07-2009 04:30 AM by rustfever | 31 comments »

Latest Update.The Woodorking Show people have given us a booth at the WoodWorking Show at the Sacramento Convention Center on Nov 13, 14, & 15. They also will tell our story in their press release and other print hand-out. They have made us another offer. FREE TICKETS, but with a condition. They will give us a free ticket for each person that works in our booth. I am passing that offer to LumberJocks. I will need each reciepient to agree to spend a minimum of 1 hour in the boo...

Read this entry »


View Sheila Landry (scrollgirl)'s profile

My Journey As A Scroll Saw Pattern Designer #1145: Black Beauty

10-05-2013 10:38 AM by Sheila Landry (scrollgirl) | 31 comments »

I know . . . I am a spoiled brat! At least I feel that way this morning. How can I not when I am so fortunate to now own a “Special Edition” of the FINEST scroll saws made? Oh – and it is actually PRETTY as well! After all, for someone like me who’s other job is an artist, it is an extra bonus to have such a fine piece of machinery color coordinate with the rest of the house. Especially since it sits in the corner of my kitchen. Ah . . . but now I am sounding lik...

Read this entry »


View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #7: Cutting Inside Corners and Angles

08-20-2011 08:59 PM by Sheila Landry (scrollgirl) | 29 comments »

So far we have looked at how to prepare our wood, choose a blade, cast on and off a piece and cut outside curves and corners. Now it is time we do some inside cutting. Most people associate scroll sawing with cutting fretwork. At first many people don’t understand that in order to cut fretwork pieces, you need to drill entry holes in the ‘waste area’ (or the part of the pattern that drops away when you finish your cut) and thread the blade through that drilled hole ...

Read this entry »


1 2 3 4 ... 48 next »
477 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase