This past week I picked up a couple of older power tools that look to have great promise. The first is a Delta Model 31-460 Type 2 Belt/ Disc Sander. The other a Delta Model 40-530 Scroll Saw. I spend about an hour cleaning up and adjusting the sander. It runs well, but as you can see from the photos it needs some cleaning up in areas where surface rust has formed. The miter and ledge are in fine working over. The sanding belt needs to be replaced. From the v-shaped groove in the stop, I w...
My Journey As A Scroll Saw Pattern Designer #1187: Doing Something for Myself - "Reaching for the Stars" Tree Topper
As a “professional designer” and a craft person, it seems as if I am always creating things for someone else. Be it the magazine, items to sell, or gifts to others, it has been somewhat of a struggle for me to be able to justify taking some time to make some fun projects that I want to keep for myself. Especially at this time of year. But when I changed over my little “all season” tree to a Christmas theme last week, I noticed that I didn’t have any type of s...
A while ago I was asked to make a scrollsaw portrait of Michael Jackson for a person who loved music, so I thought about the idea of using a vinyl record as the actual medium for the cutting. I had NO idea how this would work, so I first did a couple of practice pieces. First, a 1 to 1 scale cutting of an old cassette tape – kind of ironic, eh? Then I decided to do a Beatle’s cutting using the entire record (don’t worry, the label is a fake ;-) The v...
I just completed a set of two video’s to help out the newbies to scroll sawing. The video series includes a printable “Cutting Guide” that can be used for practice cutting and covers most of the different types of cuts that will be performed on a scroll saw. Part 1 goes over the basics of pattern application, wood preparation and some insight on how to drill straight holes as well as preventing tear out during the drilling process. I recommend that everyone watch the part on preventing tea...
I’ve been looking at a lot of other folks Intarsia projects here on Lumberjocks, and finally decided to bite the bullet, and try one of these myself. I am using a Judy Gale Roberts pattern, I-96, which is a mother horse and her colt, grazing in a field.I like the pattern, and hope I can give it the really nice finished look, like others have.I am at the sanding stage right now, taking each piece, and trying to round all the edges.What a sanding task! I have got to figure out a faste...
CURRENT STATUSI have just about blogged this thing to death and I’m still not finished, but nearly so. WHAT’S NEXT?I still have to do the teeth, and I plan to do something with the tail. It is too drab and it doesn’t go too well with the lower belly. I will have to figure out how to solve both problems. My next and last blog will be the resawing of the project just so you can enjoy the suspense and drama along with me. To get a good resaw I must, as Shipwright has advi...
Had a discussion with a friend today about easy ways to align your scroll saw blade to the table. Surprisingly, It was a lot more difficult to explain than I thought it would be, so I figured I’d just make a quick video and show the process instead. This process is nothing new, but I’m sure there are a few out there that might not know how to do it this way so I wanted to show you as well, just in case! BobScroll Saw Forum
TODAYS WORKThe yellow was added to the whiskers, eyebrows and legs. I still have some yellow to do on some of the toes.The tongue is also inserted, but not quite finished. The top photo is from my last blog for comparison with the today’s photo at the bottom so you can get a feel for whats been done. There is still a lot of work to go, so if the picture looks a little strange in places that is probably why. WHAT’S NEXT?The obvious things are the eyes, mouth, muzzle, teeth, ...
WORK DONE SINCE LAST POSTThe upper and lower belly sections are done (excepting remedial work), the claws have been added together with some other small bits and pieces here and there, The eyebrows are finished except for the yellow to be added, and the walnut outline to the head and lips are in place. The walnut in the head will only be an outline after the final Ash piece is inserted in the middle. The three photos below show the original artwork, the last update and where we are now. ...
WHAT I DID TODAYI managed to get more of the black filled in. Some of the fingers, the whiskers and a few other African Blackwood infills. I also put in the middle leg with Ash. The whole project looked so grubby from glue residue and smudges that I finally cleaned it up a little. It isn’t easy because many of the infill pieces are slightly proud of the background. I have been whittling these down with sharp chisels a little everyday. My intention is to handplane it when everything i...
- My Journey As A Scroll Saw Pattern Designer - 1614 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1639 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 182 entries