I was asked by at least a dozen people over the last few months how I do my portraits. Particularly, how I get up to the point of actually putting blade to wood. In other words…… the Prep Work. I thought I would make Part 1 of my “Portrait Scrollsawing in a NutShell Blog” cover just that topic – getting everything ready to actually start sawing. The only “prep work” part I won’t cover in this section is designing the pattern itself – that will be at LEAST one, if not multiple future b...
Yesterday I got a little bit side tracked. Not really too far off the path I was heading, but just enough to change gears for a day and try something new. So it was for a good cause. I often receive many comments from people that I call ‘regulars’ here on the Lumberjock site. Even though this site is quite large at over 50,000 members, as with any place, we seem to fall into a niche or corner of the site where we feel accepted and comfortable. I am not different, as when I wr...
Hello, This is just a Small introduction Video. Something I’ve been doing to try and better my Video Editing Skills with various Filters and all of the other stuff whatever there called lol. Hope you like it, you can also subscribe to my Feed in iTunes, I’ve decided to Convert all of my Videos to Quicktime format “MOV” So i can cover iTunes as well as my Blog for Video Feed… Thanks and enjoy the video!
There are many different avenues that one can take and still be on a creative path. While having choices is good, there are times when there are almost too many things to choose from and only so many hours in the day. While most of us are familiar with the phrase ‘spreading ourselves too thin’, there are times when things are not as defined as we would like them to be as far as which path to follow and it is hard not to want to do everything at once. I often feel that this is t...
Hi all; After reading Douglas’s blog on marquetry I figured I would add a few comments about the fine art of marquetry. Rather than do a lot of typing here, it’s easier to just provide a link to the page on my site. I’ve always been a bit lazy. This is listed under the scroll saw index, as well as the veneering index. http://www.prowoodworkingtips.com/Marquetry_Basics.html I hope it provides some additional information for anyone wanting to give this a try. ...
As the sun begins to illuminate the morning sky, I look out and notice that once again the snow is gently falling on us here in Nova Scotia. This time is isn’t the windy, violent type of snowfall that occurred the other day, but rather the soft, large flakes that gently float to the ground. It is getting lighter out, and I can see that already several fresh inches of snow have accumulated on the ground. As yesterday things were all cleared up from the weekend storm and once again th...
The 3rd Video in my Installment. Enjoy the video. All comments, Critique or just any ole comments are welcome on all my Videos. Handi
Today I am doing some cutting for the topper for my banners and writing the patterns packet, so I really don't have much of my own work to show you. However, I thought it would be a great opportunity for me to share a video with you that my friend Leldon Maxcy just made on how to cut inlay pieces for scroll sawn ornaments.I have known Leldon for probably about 15 years. That's pretty long considering how young he is! I met him at a woodworking show when he was only a ...
Good morning on this beautiful Monday. Some time over the weekend, the season of autumn crept in and it is amazing how profound the changes in the morning are even though it is only a few days old. As I wake up each morning, I notice that it is just a bit darker outside, and the cool, crisp air simply smells of the change of season. I look across the road to the trees along the river and each day notice that they are beginning to blush a bit and every so slightly the leaves are changing c...
Everyone, I would like to Apologize with this Post, I have missed a Detail in my Video Editing, and a Fellow Jock has Brought it to my Attention and now i feel Embarrassed about it lol. There is no Audio in the First part of the Video, I would say pretty close to about 25 Seconds to 40 Seconds into the Video there is no Audio, The Scrolling Text at the bottom of the Video indicate the Fast Forwarding of the Video and that DON’T For sure have audio, that was on purpose so I can reduse...
- My Journey As A Scroll Saw Pattern Designer - 1404 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 85 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1428 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 229 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 194 entries
- shipwright - 185 entries
- Rustic - 185 entries
- Chris Davis - 183 entries
- stefang - 172 entries
- BritBoxmaker - 168 entries
- PurpLev - 163 entries