Well, I was asked to put together a blog on how I made my segmentd ring. Since I had to make a new one for myself, (first one too small) I thought I would go ahead and do a step by step picture tutorial. My first time ever doing something like this , so hope it comes out OK. Here goes; Wood Selection The first step in making the ring is deciding what woods to use. As we all know, the selection is quite large. One of the most important things is color, but the most important is hardne...
Well, I been hanging around here at Lumber Jocks for going on a year now. I have learned so much from so many, and can honestly say I owe a lot of what I know today to the sharing of knowledge here. So after attempting my latest “Exploration” into the wild world of woodworking I figured this would be a good a time as any for me to pass along a little blog on how I did my “Dreaded Inlays” ..... Long story short, I was hit up by a coworker asking me if I could build h...
Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
My wife asked me when I was going to make her a box to keep our business cards in when we travel. I had made a few boxes but never one upon request- especially from her. So I wanted this to be special. I went about making a bandsaw box in an unconventional way and I was having a problem with the hinge design. One night I had a dream of how to do it and wrote it down right away in the morning. Here are the steps I used to make the box using mainly the bandsaw and the scroll saw for one tough p...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #1: Introduction - Sign Up and Objective
Hi, Everybody! My name is Sheila Landry, although many of you may know me as ‘Scrollgirl’. I’ve had that nickname for over fifteen years now and chose it because I LOVE SCROLL SAWING! I work as a contributing editor for Creative Woodworks and Crafts magazine and I also have my own pattern business called Sheila Landry Designs where I sell my original scroll saw and painting patterns. I was asked by MsDebbie if I would like to host an online scroll saw class here on...
When I pulled this off of my cabinet, I did not expect so many would like to build these. Well, I took one apart so that we could make some notes – and then detail construction. Below: The marshmallow catapult in it’s finished form. As you can see below, the catapult concists of only 6 wooden parts & some miscellaneous hardware, all easy to build with handtools if need be. When we did this project with the scouts, we put it together as a kit that they could sand ...
Ok a little while ago I posted a project that was a box that was made to look like a basket weave. It is very striking to look at if you dont know how it is made and is really easy if you have a scroll saw. A few people were interested in the making of it so here goes- First thing first get yourself a pattern, there are a few books about making basket weave boxes. Or alternately you could make your own. Once you have a pattern- You need two different patterns( look closely as these are...
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
Hi all, I wanted to make this blog in order to show the process I use to make the woven basket that is shown in my projects. This will be my first blog, so bar with me, please! I didn’t come up with this concept of making these baskets, but after making 30 or so I feel I can make them better than the directions the author provided. These plans are available from Scroller Ltd. These are awesome baskets to make. And I sell them for a nice profit considering you are only using tw...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #2: Basic Supplies and (EGADS!) Homework!
Well, it looks like we are going to have a great group here! I am really happy with the enthusiasm of everyone who wants to participate, and also the cheerleaders. You can all get back in your seats now and we can start to get down to business. I wanted to get this post up here by the weekend so that if you need to get some supplies to start, you will have some time to do so. One thing that I really like about scroll sawing is that it takes very little ‘equipment’ to mak...
- My Journey As A Scroll Saw Pattern Designer - 1600 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1625 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries