Woodworking blog entries tagged with 'screwup'

  • Advertise with us
View Gary Fixler's profile

random #9: Just having one of those projects...

03-16-2009 10:07 AM by Gary Fixler | 5 comments »

I’m building a little rack system currently, and I just keep failing miserably. I wanted to do something a little nicer than usual, so I made some 1/4” walnut pegs, and was planning to face the front edges of the rack with 1/8” walnut strips, and drill and peg through that with lighter wood that matches the plywood of the sides and shelves. To hold the shelves in, I’d drive pegs through from the outside, walnut pegs through ply sides, the inverse of the fronts. For wha...

Read this entry »

View Gary Fixler's profile

random #6: Suffolk Machinery band saw blades - helpful folks

03-06-2009 12:17 AM by Gary Fixler | 3 comments »

I made the mistake of ordering 1 each of their 1” thick (my saw’s max) 103PC (3TPI) and 102PC (2TPI) swedish steel blades in the wrong length. I went by info I found online when ordering, instead of walking out to the shop to check for sure. Online places said 133”. The machine says 135”-137”. It just wouldn’t go on, even at the bottom of the top wheel’s extension. I called Suffolk just now, and they said 133” is a common length, so no re...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics