LumberJocks

Woodworking blog entries tagged with 'scraper plane'

  • Advertise with us
View mafe's profile

Japanese tools #1: Japanese hand plane KANNA setup

07-29-2011 01:30 AM by mafe | 28 comments »

Japanese hand plane setupFitting, tuning and sharpening. If you are looking for ‘ready out of the box’ just leave this blog now!This blog is for those who want to understand their tools, to trim, adjust and become the master of your tool.It is not a show off, not a tool gloat, but two basic Japanese hand planes going from useless to being used. Reading Toshio Odate’s inspire ring words in his book ‘Japanese woodworking tools their tradition spirit and use’ where ...

Read this entry »


View mafe's profile

Hand plane DIY blog #4: Hand plane, scaper planes and toothing plane ramblings...

06-29-2017 12:08 AM by mafe | 18 comments »

Hand plane DIY bloghand plane, scaper planes and toothing plane ramblings… My last blog on making handplanes was the one about the small planes , those little fellows bring plenty of smiles, both to me and guest in the shop.This time it was a need for a small scraper plane, the buy of a German toothing plane blade some time back and finally the reason I took off, was a old friend who wrote me, that she and her husband needed a small hand plane, that they can use when making arrows fo...

Read this entry »


View mafe's profile

Hand plane DIY blog #5: Still rambling about hand plane making...

06-30-2017 11:35 PM by mafe | 8 comments »

Hand plane DIY blogStill rambling about hand plane making… Here we go again…This is part two of the hand plane ramblings, in this part we should see both the toothing plane, two small hand planes with antique Peugeot irons, a Krenov type long block plane with a Hook iron and a toothing plane come to life. Thank you for the birthday greetings in my last post, had a wonderful day and a wee birthday party at my workshop, what more can a man ask for?. Let’s jump into th...

Read this entry »


View Div's profile

A bit of a scrape

05-18-2010 10:45 PM by Div | 5 comments »

Yesterday I had a client walk in the shop with some clear Pine boards and the request to joint it up into an L-shaped kitchen countertop, 24” wide. Work is work and I told him to come and collect tomorrow. In between other work, I planed the boards and noticed they were somewhat resinous but didn’t give it much thought. This morning I took the tops out of the clamps for a few passes through the drum sander. When I noticed sticky dust on the exit side, I knew I had a problem.When I opened the ...

Read this entry »


View Ron Aylor's profile (online now)

• Lynnsay's Prie Dieu #13: It Is Finished

05-11-2017 11:27 PM by Ron Aylor | 17 comments »

It Is Finished –  Over the last few weeks shop time has been a rare commodity, due to dark, gloomy weather; yet, after a most enjoyable outing with my bride in the rain … I managed to procure hinges and a lock. Eventually, the rain stopped and the clouds parted to let the sun shine through. So, it was back to the shop to wrap my brain around putting the desk together. After a cup of hot tea, and an hour or so of chopping …  ... and wedging …  ... then chopping and wed...

Read this entry »


View Ron Aylor's profile (online now)

• Lynnsay's Prie Dieu #12: Three in One

04-26-2017 03:33 PM by Ron Aylor | 6 comments »

Three in One –  With frame construction completed, the desk dovetailed together, and the sticking completed for the fitted top and lid, it was time to venture into the interior of the desk. I decided to use Honduran mahogany for the bottom, shelf, dividers, and drawer fonts. I thought this would make for a nice contrast against the gummy cherry. I started off by resawing a piece of mahogany into 3/8 and 1/4 inch thick pieces for the shelf and dividers.  I really should think about getti...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com