Okay, here’s one of the most useful jigs that I’ve ever made. And if I lost i tomorrow, I could build another in about fifteen minutes. I’m not going to include any dimensions as you should make one to fit your own situation. I made this up obviously with scraps. If I made it out of anything else, it wouldn’t work any better. When I build things there’s always some small parts in need of a little fitting. Viola! I frequently use this #7 r...
Just showing how easy these are to make.
Perhaps you watched the recent woodworking video How to make poorboy Parallel Clamps. Here are a few questions from one viewer that got me thinking.A quick question …The poorboy parallel clamps obviously works well for panel glue ups, but what are limitations you could see. For instance:........................... Could you use this with deeper pads for a benchtop glue up? or would the clamping force not be up to that task? Would longer pads apply more pressure across wh...
The Bible study I am a part of is having a party for Christmas. Each person is supposed to bring one gift, spending no more than $5.00. I saw this as a challenge. $5.00 isn’t much and I wanted to offer something of higher value. Lucky for me, my wife recently brought home some free pieces of wood. She works at an art gallery and they were getting rid of some random things. She saw some wood they had used as plaques that were going to be tossed. As she is industrious and thoughtful,...
I decided to burn through some more of my scrap wood, this time stuff left over from when I built the miter saw/router table station. There was some pretty good sized 1/2” plywood left over cut at odd angles (which was itself scrap from our shelving project). I have been mulling over what to do with this odd sized (about 2’ x 4’) wood and finally hit on an idea: a saw till. For a while now, my master plan has been to get the tools that I use regularly (that is, the h...
Hey everyone, I am introducing my new Youtube channel called the A.S.D. Rundown! This channel is in association with my main main channel, but will be specific to doing project follow ups,simple shop projects as well as some simple shop tips, general happenings around the shop and overall general video blogging. To introduce the channel I am starting off with a Simple Spring time Project. This plant trolley can literally be built in minutes.. If you like the video be sure to subscribe to my ...
I can’t claim this as my original idea. I saw it somewhere sometime in the past. [EDIT] I found where I got this idea. It was in this video tip by Chad Stanton. It’s a great idea though and uses up some small scraps of plywood. You can buy paint pyramids, but I like the free option. All I did was take pieces of 1/2 inch plywood and cut them into approximately 2×2 inch squares. Then I drilled a pilot hole and made a countersink for a deck screw so they would sit le...
There was a pretty popular scrap bin challenge this past fall, and I thought I would get a head start on 2015. This is how I handle my left over scrap wood. View on YouTube
Just before starting the new job, I decided to clean up one little area in front of my garage and log racks. I used some 2×4s from that Mexican restaurant that closed down, and pine slats from crates from a restaurant next door to that which was receiving kitchen appliance deliveries at the time (both scores – junky as they may be – here). The wheels were rescued from the simple 2×4 hand truck I made awhile ago, which broke (last 2 pics) from dragging too many huge logs ...
Hey guyzz, So little time these days with all the work at the university. But I finally settled for a while to build a wooden clamp for test tubes to make a first measurement of the temperature at which xylindein, the pigment produced by Chlorociboriae, permanently loses its color. As you all know, sanding wood leads to quite high temperatures at the surface, and I had previously noticed that xylindein was destroyed when bandsawing stained wood with a freakin’ dull blade from hell...
- My Journey As A Scroll Saw Pattern Designer - 1696 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 92 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Life as an Amateur Woodworker - 69 parts
- Sheila Landry (scrollgirl) - 1721 entries
- frank - 417 entries
- dbhost - 403 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 287 entries
- William - 258 entries
- shipwright - 232 entries
- Betsy - 228 entries
- Stevinmarin - 212 entries
- stefang - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 204 entries
- robscastle - 196 entries
- Smitty_Cabinetshop - 191 entries
- Dave Rutan - 191 entries
- Rustic - 190 entries