LumberJocks

Woodworking blog entries tagged with 'scrap wood'

  • Advertise with us
View Sodabowski's profile

Spalters Inc. #6: determining the temperature of destruction of xylindein

10-27-2011 02:17 PM by Sodabowski | 19 comments »

Hey guyzz, So little time these days with all the work at the university. But I finally settled for a while to build a wooden clamp for test tubes to make a first measurement of the temperature at which xylindein, the pigment produced by Chlorociboriae, permanently loses its color. As you all know, sanding wood leads to quite high temperatures at the surface, and I had previously noticed that xylindein was destroyed when bandsawing stained wood with a freakin’ dull blade from hell...

Read this entry »


View jcees's profile

The Flip Side of Woodworking...

04-07-2008 09:25 PM by jcees | 14 comments »

Okay, here’s one of the most useful jigs that I’ve ever made. And if I lost i tomorrow, I could build another in about fifteen minutes. I’m not going to include any dimensions as you should make one to fit your own situation. I made this up obviously with scraps. If I made it out of anything else, it wouldn’t work any better. When I build things there’s always some small parts in need of a little fitting. Viola! I frequently use this #7 r...

Read this entry »


View Gary Fixler's profile

005: scrap cutoff shelves #2: and now there are two

02-25-2010 01:33 PM by Gary Fixler | 14 comments »

All the pieces for both units were cut out at the same time, so there was another waiting to be assembled. I spent some time today on that. Here it is next to the first one, waiting to be filled up: I’ll have to find a new place to hang my roller stand, but that’s okay, as I’ve only been able to hang one of the two here on its over-the-rafters hooks. Right now it’s immediately in front of the new shelving: I learned something interesting about French clea...

Read this entry »


View Bob Simmons's profile

Poorboy Parallel Clamps…questions from a Woodworker

02-24-2011 02:41 AM by Bob Simmons | 9 comments »

Perhaps you watched the recent woodworking video How to make poorboy Parallel Clamps. Here are a few questions from one viewer that got me thinking.A quick question …The poorboy parallel clamps obviously works well for panel glue ups, but what are limitations you could see. For instance:........................... Could you use this with deeper pads for a benchtop glue up? or would the clamping force not be up to that task? Would longer pads apply more pressure across wh...

Read this entry »


View DogwoodTales's profile

Cleaning Out Scrap

04-17-2012 08:10 AM by DogwoodTales | 8 comments »

Recently I took some time to clean out old scrap wood and other misc items that I have had sitting around in the workshop for ages. So I decided to make a fun video of it. I hope you enjoy it. Sometimes it’s difficult to make the decision to keep something or to get rid of it. Scrap is great to have around for various reasons, however too much scrap becomes a nuisance and even a safety hazard especially in a small workshop like mine. It’s important to limit the scrap wood and v...

Read this entry »


View Gary Fixler's profile

Wood Art #9: cute use for scrap wood - hanging block shelves

05-18-2010 06:42 AM by Gary Fixler | 7 comments »

Got a bunch of little wood scrap blocks, some planks, rope, and hooks? I found this online: More pics.

Read this entry »


View Gary Fixler's profile

organization #2: a simple, rolling, scrap wood, scrap wood holder

05-13-2010 10:51 AM by Gary Fixler | 6 comments »

Just before starting the new job, I decided to clean up one little area in front of my garage and log racks. I used some 2×4s from that Mexican restaurant that closed down, and pine slats from crates from a restaurant next door to that which was receiving kitchen appliance deliveries at the time (both scores – junky as they may be – here). The wheels were rescued from the simple 2×4 hand truck I made awhile ago, which broke (last 2 pics) from dragging too many huge logs ...

Read this entry »


View WoodJediNTraining's profile

Simple Spring time project - Plant Trolley

03-03-2013 04:21 AM by WoodJediNTraining | 4 comments »

Hey everyone, I am introducing my new Youtube channel called the A.S.D. Rundown! This channel is in association with my main main channel, but will be specific to doing project follow ups,simple shop projects as well as some simple shop tips, general happenings around the shop and overall general video blogging. To introduce the channel I am starting off with a Simple Spring time Project. This plant trolley can literally be built in minutes.. If you like the video be sure to subscribe to my ...

Read this entry »


View Deela40's profile

Making a Game for $5.00 #1: Starting Out

12-18-2009 02:54 AM by Deela40 | 4 comments »

The Bible study I am a part of is having a party for Christmas. Each person is supposed to bring one gift, spending no more than $5.00. I saw this as a challenge. $5.00 isn’t much and I wanted to offer something of higher value. Lucky for me, my wife recently brought home some free pieces of wood. She works at an art gallery and they were getting rid of some random things. She saw some wood they had used as plaques that were going to be tossed. As she is industrious and thoughtful,...

Read this entry »


View JSB's profile

Video: DIY kerfmaker with scrap hardwood and a drywall screw

02-01-2013 05:59 PM by JSB | 4 comments »

Just showing how easy these are to make.

Read this entry »


1 2 next »
12 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase