I use a simple method to make jigs that fit over the fence on my table saw. In this video I show that method and also some uses for the jig. The video can be found at: https://www.youtube.com/watch?v=Uq4RY_xkmEA . I hope you find the information useful.
There was a pretty popular scrap bin challenge this past fall, and I thought I would get a head start on 2015. This is how I handle my left over scrap wood. View on YouTube
I can’t claim this as my original idea. I saw it somewhere sometime in the past. [EDIT] I found where I got this idea. It was in this video tip by Chad Stanton. It’s a great idea though and uses up some small scraps of plywood. You can buy paint pyramids, but I like the free option. All I did was take pieces of 1/2 inch plywood and cut them into approximately 2×2 inch squares. Then I drilled a pilot hole and made a countersink for a deck screw so they would sit le...
Hey everyone, I am introducing my new Youtube channel called the A.S.D. Rundown! This channel is in association with my main main channel, but will be specific to doing project follow ups,simple shop projects as well as some simple shop tips, general happenings around the shop and overall general video blogging. To introduce the channel I am starting off with a Simple Spring time Project. This plant trolley can literally be built in minutes.. If you like the video be sure to subscribe to my ...
Just showing how easy these are to make.
I decided to burn through some more of my scrap wood, this time stuff left over from when I built the miter saw/router table station. There was some pretty good sized 1/2” plywood left over cut at odd angles (which was itself scrap from our shelving project). I have been mulling over what to do with this odd sized (about 2’ x 4’) wood and finally hit on an idea: a saw till. For a while now, my master plan has been to get the tools that I use regularly (that is, the h...
Recently I took some time to clean out old scrap wood and other misc items that I have had sitting around in the workshop for ages. So I decided to make a fun video of it. I hope you enjoy it. Sometimes it’s difficult to make the decision to keep something or to get rid of it. Scrap is great to have around for various reasons, however too much scrap becomes a nuisance and even a safety hazard especially in a small workshop like mine. It’s important to limit the scrap wood and v...
Hey guyzz, So little time these days with all the work at the university. But I finally settled for a while to build a wooden clamp for test tubes to make a first measurement of the temperature at which xylindein, the pigment produced by Chlorociboriae, permanently loses its color. As you all know, sanding wood leads to quite high temperatures at the surface, and I had previously noticed that xylindein was destroyed when bandsawing stained wood with a freakin’ dull blade from hell...
Here is a challenge for all and sundry to get rid of their scrap pieces for charity http://lumberjocks.com/projects/53710
Perhaps you watched the recent woodworking video How to make poorboy Parallel Clamps. Here are a few questions from one viewer that got me thinking.A quick question …The poorboy parallel clamps obviously works well for panel glue ups, but what are limitations you could see. For instance:........................... Could you use this with deeper pads for a benchtop glue up? or would the clamping force not be up to that task? Would longer pads apply more pressure across wh...
- My Journey As A Scroll Saw Pattern Designer - 1660 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1685 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 226 entries
- Stevinmarin - 212 entries
- stefang - 208 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 201 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries