Ok, so I am sitting here weighing the costs of some tools. On the one hand, the Festool Domino set with dominos, guides, and a dust collector for approximately $1300. On the other hand, I need a table saw and a planer. The money for the domino would likely cover these items. Which way do I go? The Domino would allow me to do mortise and tennon joints much more easily than now. It would have the greater flexibility of positions, large sizes, etc. compared to the mortise machine. But ...
I have been resisting buying a Radial Arm Saw (RAS) for at least the last year. I have a great Sliding Compound Miter Saw, Router, and Table Saw. The only operation that seemed to be quick with a RAS that I could not easily do with the tools I have is making cross cuts using a dado set. Last week Blake posted a project where he did a wonderful job restoring a 1959 DeWalt Radial Arm Saw. I really loved the job he did. Sunday afternoon I was browsing Craigslist and saw an ad for a saw si...
In my last post I said I would re-sharpen the Drabble and Sanderson to try Mark Harrell’s hybrid sharpening, but I decided to leave that one with 10 degrees of rake and 10 degrees of fleam. Instead, I re-toothed my 12” Spear and Jackson Leap Frog carcass saw from 10 tpi to 12tpi and applied Mark’s hybrid filing to that. I figured it would be good to have a 12” carcass saw with a combination filing as well as a 14” sash saw. Mark also recommends 10 degrees of rake, but he relaxes th...
Last month, while at the Woodstock Wood Show I had the opportunity to check out the SawStop table saw and chat with Eric Gewiss, the Marketing Manager. The HistorySteve Gass, Ph.D., a woodworker himself, invented the SawStop technology in 2000. Mr. Gass met with existing manufacturers to have them include his SawStop in their product lines, but did not have any success. After a couple of years of trying, he, along with David Fulmer and David Fanning, built their own table saw and in 2004 ...
In this blog series, I’d like to invite you to join me on a journey of discovery as we look at the history and restoration of an old English back saw. This is where the story starts… I really wanted one of these (Adria Large Tenon Saw 14”x 4”) …but didn’t have enough of this: So over a number of weeks, I trawled through eBay.co.uk, until I finally found and bought this… The saw plate is 14” long and the saw is 18 ½” overall. It has an iron back and is...
Over on the Saws, using collecting, restoring buying forum, summerfi (Bob) asked the following question with the accompanying collage of warranted superior medallions: “I have a question about Warranted Superior medallions. I’m most familiar with the eagle medallion, which came in several versions. There are several other WS medallions though (see pic below of medallions copied from the internet). My understanding is that some British sawmakers used the WS medallion on their saws, and some...
Well the rain finally stopped today and the sun came out. Looking out on my garden, the squirrels were making the most of it. I sat and watched this youngster somersaulting around the garden, before settling on a branch to devour his morning pine cone. Following his lead, I took the opportunity to get outside and sharpen another saw. Next up is the W. Tyzack, Sons & Turner No.120. Fourteen inches long with a .030” thick plate and an extra heavy spine. This is by far the heaviest ba...
Have you ever thought about why some saw makers add negative rake to the teeth of their rip saws? I have, but when I was drawing a 12 TPI template in Sketchup to re-tooth my Disston No.5 carcass saw, I realized that adding a touch of rake actually increases the volume of space between the teeth. If you look at a section through a saw file, you’ll see that you have an equilateral triangle (ignoring the rounded corners that define the gullets) and we know that the three angles of a triangle ...
When designing the shop I tried to anticipate the type of work we would be doing. Looking back, I wasn’t even close. However, in spite of that, the work flow is very much the same for many woodworking projects. Our shop is laid out considering that work flow. Our entrance door is where we unload both sheet goods and solid lumber. We stack the lumber on stickers, prior to use, and the plywood is placed on a drywall cart. We place lumber on the chop saw station, which ...
This is a photo taken with my iPhone of the brace being refurbished. I’m really just getting to grips with downloading using the iPhone and Photobucket?? Hopefully it is successful? OMG it works! In this pic you get a closer look at the chuck body- This is held in a ‘cheapo’ vice I bought from ‘ALDI’ (Wal-Mart, but even cheaper, to our American cousins) years ago. It is very handy cos you can adjust it to suit what you are doing. It originally had...
- My Journey As A Scroll Saw Pattern Designer - 1696 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 92 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Life as an Amateur Woodworker - 69 parts
- Sheila Landry (scrollgirl) - 1721 entries
- frank - 417 entries
- dbhost - 403 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 287 entries
- William - 258 entries
- shipwright - 232 entries
- Betsy - 228 entries
- Stevinmarin - 212 entries
- stefang - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 204 entries
- robscastle - 196 entries
- Smitty_Cabinetshop - 191 entries
- Dave Rutan - 191 entries
- Rustic - 190 entries