SAW MEDALLION REFERENCE GUIDE Saw medallions, or label screws as they are sometimes called, are invaluable for identifying old saws. Additionally, many of them are small works of art in themselves. I don’t know of a comprehensive reference source for saw medallions that covers all makers, so I decided to start one here. My intent is to add to this list over time to make it as complete as possible. If you run across a medallion that is not listed here, post a picture of it in the comments, ...
It’s hard to believe just two short years ago the only hand tools I owned were a retractable measuring tape and a few miniature tools (6” nail bar, vise grips, etc). Then I joined Lumberjocks and shortly thereafter The Hand Plane Swap. That’s when I got The Affliction (or it got me)! I bought two block planes, then a bench plane, then…you get the idea. It didn’t stop with planes. I went to check out a Craig’s List ad for planes and not finding any in my pri...
There are so many outstanding saw restorations on LumberJocks, I hesitate to post my first attempt. But I have a cheap saw that has the potential to be a good user, so here goes. =========== Edit #3 ===============Now a third saw, a D-8 thumbhole variety…. See blog entries in posts below.================================= ========== Edit #2 =================Okay, here’s another saw for my own type of refurb. First I drilled a ‘new’ blade to match up with a ...
So after much research and debates, I have finally charged the card, and 2 days later the delivery arrived with the new saw in the box (I opted to have it delivered from the store as opposed to pick it up myself – at 450lbs, I simply wouldn’t be able to unload it myself) Delivery from HD was swift and smooth, positive and friendly guy stop at my place saturday morning, and helped me position the box in my garage – I couldn’t be happier (took 5 minutes, 4.5 of those was...
When I did my research, I found a number of good saw vise designs on the web. Some were simple, whilst others were more complex. The fundamental requirement of a saw vise is that it clamps a saw securely while you sharpen it, everything else is just icing. So it can be as simple as sandwiching the saw plate between two pieces of wood in a vise on your bench. Last December, I had the privilege of attending a saw sharpening class with Paul Sellers at Penrhyn Castle in North Wales. At the beginn...
When I sat down to write this blog, my PC was asleep. I pressed a key and it immediately sprang into life so that I could begin typing. I tend to write my blogs in MS Word before pasting them into LJs and as I type, I receive feedback on my grammar and spelling and change my text accordingly. Hand tools are no different to MS Word really. Lying on a bench or hanging in a tool cabinet, they are nothing more than inanimate objects. Pick them up and use them for their intended purpose and they p...
Next up on my epic backsaw journey is a much younger saw (60s, 70s? – not sure exactly). It’s a W. Tyzack, Sons & Turner filed 10 TPI crosscut and sports an extra heavy brass back. I bought this saw because it was cheap and there was nothing wrong with the saw plate. Gone is the subtle stamp that appeared on the brass back of a 19th century Tyzack saw. Instead, this spine has a rather garish impression. The crisp elephant logo now looks like a partially thawed out woolly mam...
2012 is a big year for Britain. Not only are we hosting the Olympics, but we’re also celebrating the 60th anniversary of Queen Elizabeth II’s accession to the throne. It’s Her Majesty’s diamond jubilee. Even my wife is organizing a street party for around 200 residents and I’ve been roped into building all kinds of weird and wonderful things for the day. Yes folks, marquees will be erected, brass bands will strike up, flags will be waved and I’m sure we’ll all feel very patriotic by the end o...
Began work on the upper doors of the Wall Hung towards the end of Episode 19 by creating a bead detail on the right door while telling you of a rebate needed at the left door. No pics cutting the rabbet, but the center stiles come together just fine. All four stiles for the upper doors were cut to rough length and grooved for floating panels ‘too long ago’ to remember… The rail boards were measured and marked for their rough cuts; those are the pieces t...
Ornate carving, not seen it before. Medallion is Warranted Superior, not sure it’s original. Repairs will be done, but I’m hoping for a pic of an original. Suggestions? Thanks! EDIT: The saw’s ID is clear, refurb steps captured below. This saw will be resurrected one way or another… Here’s the repaired handle. EDIT #2: Donor blade ID’d: Cut, drilled and fit (broken orig. alongside): EDIT: Done, see below.
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries