LumberJocks

Woodworking blog entries tagged with 'sapele'

  • Advertise with us
View wrenchhead's profile

Modern Ladder Bookcase

04-18-2018 09:48 PM by wrenchhead | 5 comments »

I made this ladder style bookcase for m wife’s hair salon. She needed a place to put magazines and hair products. I made the bookcase out of Sapele wood. I hope you like it. Thanks for watching! https://www.youtube.com/watch?v=X-rKryj6ISk

Read this entry »


View ybotyawnoc's profile

Turning #1: Argh!

05-22-2013 04:38 PM by ybotyawnoc | 2 comments »

How did I not notice this scratch until after sanding to 400 grit? >:(I guess this was an errant particle from the sandpaper or something. Right on the end-grain too.

Read this entry »


View HappyHowie's profile

Christmas Gifts #1: Cell Phone Stand Prototype

11-06-2017 05:06 AM by HappyHowie | 0 comments »

After performing an inventory of my hardwood storage and surveying different gift ideas on the Internet, I decided to make cell phone stands for Christmas gifts for many family members and a good friend. I started this project by making a prototype. I asked my Annie what she thought about it. She liked it! So the project is go… For the two pieces that makes this stand I was going to use 1/4 inch thick pieces of hardwood and their width will be 2 7/8 inches. This thickness ...

Read this entry »


View Steve's profile

Shop Notes #13: Really Lousy Estimating

03-19-2018 03:51 PM by Steve | 0 comments »

I started out with a goal to produce seven jewelry cabinets by the end of this week, three in sapele and four in walnut. Along the way last week, I had to set three aside—to be finished later. Milling up the door frame elements, I only made enough for one (and a half!) sapele unit. I thought I would have lots of extra walnut, but it was just enough for four. I normally mill these with an up cut straight bit, but changed things up this time. This setup produced pretty good results...

Read this entry »


View Steve's profile

Shop Notes #15: Four Done, Three . . . for Later

04-03-2018 03:59 PM by Steve | 3 comments »

The weather cleared last week, and I was pleased to be able to field four completed cabinets at the spring opening of a local winery. Sales weren’t terribly brisk, but March is normally completely dead. Any sales at all are an improvement. Of the cabinets I completed, three were in walnut, the other in sapele. I finished this first cabinet in amber shellac. I have a lot to learn yet about this finish, I’ve looked at a few videos for guidance, and they tend to show an app...

Read this entry »


View Steve's profile

Shop Notes #14: Postponed

03-23-2018 03:52 PM by Steve | 3 comments »

My planned weekend show was postponed a week due to heavy rains. (It’s an outdoor event, and apparently ducks have taken up residence on the lawn where my table is supposed to sit.) The postponement was a bit of a blessing, as it relieves the pressure to get items done on a tight timeline—there’s a impulse to cut corners that I have to resist. Shortly before the cancellation was announced, I had resolved to focus on two cabinets, one sapele, the other walnut—get the...

Read this entry »


View Steve's profile

Shop Notes #11: A Productive Week

03-09-2018 08:39 PM by Steve | 0 comments »

Getting my resaw blade in place really opened the floodgates this week. I finished gluing up and planing my mid-century modern boards. I also finished up some leftover chaotic pattern boards that were still hanging around from the holiday rush. By mid week, I was looking at a stack of some 17 cutting boards, ready for sanding. The chaotic boards were made 1 1/2” thick and haven’t sold well in that size. As a test, I sawed one into two 3/4” boards and ran them through ...

Read this entry »


View Steve's profile

Shop Notes #10: Almost Up to Speed?

03-01-2018 05:36 PM by Steve | 0 comments »

It’s been cold in my shop this week—temperatures hovering around the high 40’s or low 50’s. Those who live in cold climates will laugh, but with cold like this so rare, I don’t have any provision for heat. Even though the temps really aren’t that low, it’s not long before I’ve got numb hands (and a short temper). Despite the weather, I spent a lot of time at work in the shop, though most of it was spent on actually finishing a lot of personal...

Read this entry »


View Steve's profile

Shop Notes #20: Odd Custom Projects

05-03-2018 03:25 PM by Steve | 2 comments »

I generally see a trickle of custom requests in my shop, so it’s unusual to have two under way at the same time. The first was a soap cutting device for a friend who makes and sells boutique soap. Essentially, it’s cutting wires strung over a frame, then hinged so the entire device can be pulled down through a large cake of soap. Most of the comparables I saw on Etsy were bolted together plywood contraptions. I used some scrap maple for the frame with lap joints and dowels at t...

Read this entry »


View Steve's profile

Shop Notes #12: Box Joints and Jewelry Cabinets

03-13-2018 04:08 PM by Steve | 0 comments »

I have a chance to exhibit at a local winery in about two weeks, so I put myself on a plan to get some jewelry cabinets finished in time for the event. These cabinets were based on plans for a hanging Shaker cabinet in Fine Woodworking a few years back. I’m on my fourth generation of design iteration. These are now taller than the original and have two doors instead of one. In this go around, I’ve changed from lap joints for the carcass to box joints, which should give a cleane...

Read this entry »


« prev 1 ... 5 6 7 8 9 next »
82 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com