Woodworking blog entries tagged with 'sanding jig'

  • Advertise with us
View Dutchy's profile

Making spoke wheels #7: Sanding jig

06-09-2018 07:41 PM by Dutchy | 4 comments »

Read this entry »

View HappyHowie's profile

Rocking Chair: An Online Course #5: JIGs Needed to Make This Chair

02-28-2016 04:02 PM by HappyHowie | 0 comments »

There is always a need to make JIGs so you can make something in woodworking. To make this rocking chair there are many JIGs required. Here are a few I have made for this project. There will be others needed as I get into this build further. A side slat sanding JIG. It was important to sand these side chair slats the same so that the tenons that would be cut later would be precisely the same size: 1/2 inches square. Saw burns on cherry… Orbit sander on seven slats at one ti...

Read this entry »

View TheBoxStoreCraftsman's profile

The Circle/Radius Sanding Jig

09-12-2012 02:25 AM by TheBoxStoreCraftsman | 8 comments »

Here is an easy to make Sanding/Radius Jig to fit the Rigid oscillating spindle sander Model # EB44241. I’m building this jig out of re-purposed material, a handful of hardware and a drill press turned knob so the cost to make this jig is actually on a couple of dollars (Frugal Craftsman).

Read this entry »

View rance's profile

Virtual Designs in Sketchup #12: Sanding Sheet Holder

12-10-2011 09:04 PM by rance | 8 comments »

When I make boxes, I typically tape down a full sheet of 150 grit sandpaper to the Table Saw to level the top and bottom of the boxes after they are glued up. The TS is one of the few dead flat surfaces in the shop where I teach. Being as this is a ‘portable’ situation, this is a pain because of having to tape and untape it each time. I want something to slap down on a bench and be able to quickly grab it to take it with me at the end of the day. I’ve seen the ones using ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics