LumberJocks

Woodworking blog entries tagged with 'sander'

  • Advertise with us
View YorkshireStewart's profile

Thicknessing drum sander - shop made

02-25-2008 11:09 PM by YorkshireStewart | 59 comments »

I’ve had a fancy for a thicknessing sander but a 10-20 inch model costs the equivalent of $1000 US over here and there’s no way I can justify that sort of spending so I looked into making one of my own. There’s no shortage of help to be had on the world-wide-web. The links I found useful include: Dominic’s Woodshop Kawika Ukulele Sander Ray Lanham Woodcentral Roberto-Venn School of Luthiery Mother earth The Woodshop Art Herrick Luthiers’ Friend Nick’s drum S...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 50 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View WoodenFrog's profile

Making a Lamination Style Wearable Wooden Ring! With Inlay!

02-15-2013 06:08 PM by WoodenFrog | 49 comments »

Hi Everyone, this is my first time trying to do a blog. So please bear with me, I’ll do my best!I have had a lot of request to do a blog about my rings, I do 2 kinds of rings. The Lamination style and the Bentwood style, this blog is on the Lamination style. This ring is made out of Cocobolo, Brass and has a Mother- of-Pearl inlay. I start out with 3 thin squares of Cocobolo, about a 1.5”, I have a thin sheet of brass that I cut about the same size as the wood. I lay them out to o...

Read this entry »


View KoryK's profile

Intarsia Basics #1: Introduction and Invitation to All.

03-18-2012 10:53 PM by KoryK | 41 comments »

Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...

Read this entry »


View Andy's profile

"Art Box" Tutorial #14: Dividers

08-22-2009 03:12 PM by Andy | 40 comments »

Updated 1/15/12

Read this entry »


View Lockwatcher's profile

Easy Shop Table

01-14-2011 04:02 AM by Lockwatcher | 37 comments »

I started this project after building an assembly table from an issue of Wood Magazine (March 2010). The table was a lot of work (the torsion box top) but the main unit holding the table up was an easy build. That’s when I hit upon the idea of using the same design for a group of extra tables for other uses. I’ve built a number of these already, and am using one as a router table, a miter saw station, and a sharpening station. It is built using standard re-dimensioned co...

Read this entry »


View OregonBurls's profile

How to find and harvest legal burls!

10-13-2009 05:44 PM by OregonBurls | 37 comments »

Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....

Read this entry »


View Andy's profile

"Art Box" Tutorial #1: Intro

06-16-2009 03:49 PM by Andy | 37 comments »

Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...

Read this entry »


View scrappy's profile

Making A Segmented Ring Without A Lathe / A Step by Step Tutorial

06-07-2009 09:15 PM by scrappy | 35 comments »

Well, I was asked to put together a blog on how I made my segmentd ring. Since I had to make a new one for myself, (first one too small) I thought I would go ahead and do a step by step picture tutorial. My first time ever doing something like this , so hope it comes out OK. Here goes; Wood Selection The first step in making the ring is deciding what woods to use. As we all know, the selection is quite large. One of the most important things is color, but the most important is hardne...

Read this entry »


View zzzzdoc's profile

Outfeed Table with Integrated Stockroom Supply Flatmaster Drum Sander / Storage

10-16-2013 12:18 AM by zzzzdoc | 34 comments »

OK. Going to start a new blog here. As some of you may know, a few years ago I built a very extensive cabinet / router table / Infeed Table / Outfeed Table for my Sawstop contractor’s saw. The blog is located here: Sawstop Cabinet Blog And the completed project is located here: Sawstop and Router Cabinet / Infeed Table / Outfeed Table Project As opposed to Tedth66’s cabinet for which he built a retractable, self-supporting outfeed table, I built one with a support le...

Read this entry »


1 2 3 4 ... 85 next »
842 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase