so just like every other woodworker at one point (what’s up with the other every other woodworkers is beyond me…) I was researching and learning about ways to sharpen my chisels, planes, and other blade tools in the shop. Since I am the weekend warrior at this point, and I do not need to resharpen my tools THAT often, nor THAT much, I figure that I can do without any expensive powertools (there are several of those on the market) to sharpen blades and I dont really have the spa...
If you carve, cut, sand, or even trim your finger nails (does that include everyone?) then you have got to check out this little rotary tool. This weeks review is on the Dremel 3000.
Ah… finally some woodworking at last. I don’t really have any time or the mind space lately to focus on construction and creation much, and it felt like I was just collecting tools as of late. All with the preparation of ‘one day’ to be able to get to things. As it happens, I am able to dedicate a little time for some refinishing jobs as I don’t really need to think much for those, and it’s easier for me to get in the zone and just go at it. First ...
I bought a Powermatic 66 at an online auction web site. I paid $350 plus $135 processing. After rental of a truck I drove 158 miles to York PA to pick up the saw. Upon my arrival back, I set up the mobile base, slid the saw onto the lift and moved it into the shop. We pulled the motor, pulled the worm gears, blade, wheels and everything else. I sanded away all the old paint, and repainted it with the closest color I could find. It had a hammered look when dry. The magnetic switch was mounted ...
OK, I’m actually already nearing completion of the 2nd piece which looks much better, but for this post, I’ll focus on my first-first experience with spraying, and the overall look, and results. So. After giving the top coat (4th) extra time to dry (~4-6 hours while we were out). I came back and sanded it thoroughly with 600grit sandpaper. the results were mixed: Newly finished piece in front, Original finish to compare in back Cons:1. I had some runs which show in the f...
BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE, I’D LOVE TO HEAR IT. THANKS IN ADVANCE!!!!! Ok, after collecting information from a couple key people, and looking carefully at my pieces, I’ve moved on to Sample #2. First things first. NEW CLAMPS!!!!! Not the best, but all I could get for now. On to business. More blanks, 10 this time. For these, I used a sanding block and norton 3x sandpaper. This was slow, but quiet as it was about 9:00PM when I started, and I’...
BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE ON IMPROVING THIS WITHOUT BUYING ANYTHING OVER $25, I’D LOVE TO HEAR YOUR ADVICE. THANKS IN ADVANCE!!!!! I bought some clearance pen blanks from Rockler (Pau Ferro, Indian Rosewood, and Cherry, I think). Not having any “larger” tools or super-fine precision tools (band saw, table saw, router table, etc.) I decided I would begin the adventure the “backwoods” way. I Started by laying them together, checki...
- My Journey As A Scroll Saw Pattern Designer - 1294 parts
- Extremely Average - 324 parts
- Workshop Development - 101 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1316 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 380 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 302 entries
- Martin Sojka - 297 entries
- William - 258 entries
- Betsy - 221 entries
- mafe - 219 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 188 entries
- Rustic - 185 entries
- Chris Davis - 183 entries
- shipwright - 175 entries
- PurpLev - 163 entries
- BritBoxmaker - 163 entries
- stefang - 151 entries