LumberJocks

Woodworking blog entries tagged with 'sand'

  • Advertise with us
View PurpLev's profile

Techniques & Methods #1: Scary Sharp Method

2225 days ago by PurpLev | 28 comments »

so just like every other woodworker at one point (what’s up with the other every other woodworkers is beyond me…) I was researching and learning about ways to sharpen my chisels, planes, and other blade tools in the shop. Since I am the weekend warrior at this point, and I do not need to resharpen my tools THAT often, nor THAT much, I figure that I can do without any expensive powertools (there are several of those on the market) to sharpen blades and I dont really have the spa...

Read this entry »


View Davidramsey03's profile

Cutting Board Learning #2: Making Progress

2188 days ago by Davidramsey03 | 9 comments »

BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE, I’D LOVE TO HEAR IT. THANKS IN ADVANCE!!!!! Ok, after collecting information from a couple key people, and looking carefully at my pieces, I’ve moved on to Sample #2. First things first. NEW CLAMPS!!!!! Not the best, but all I could get for now. On to business. More blanks, 10 this time. For these, I used a sanding block and norton 3x sandpaper. This was slow, but quiet as it was about 9:00PM when I started, and I’...

Read this entry »


View A Slice of Wood Workshop's profile

Tuesday Tool Time #4: With no further waiting.....THE DREMEL 3000

1000 days ago by A Slice of Wood Workshop | 5 comments »

If you carve, cut, sand, or even trim your finger nails (does that include everyone?) then you have got to check out this little rotary tool. This weeks review is on the Dremel 3000.

Read this entry »


View PurpLev's profile

Adventures in Spraying #1: Surface Preparation

1484 days ago by PurpLev | 9 comments »

Ah… finally some woodworking at last. I don’t really have any time or the mind space lately to focus on construction and creation much, and it felt like I was just collecting tools as of late. All with the preparation of ‘one day’ to be able to get to things. As it happens, I am able to dedicate a little time for some refinishing jobs as I don’t really need to think much for those, and it’s easier for me to get in the zone and just go at it. First ...

Read this entry »


View Bradford's profile

PM66 restore

1590 days ago by Bradford | 6 comments »

I bought a Powermatic 66 at an online auction web site. I paid $350 plus $135 processing. After rental of a truck I drove 158 miles to York PA to pick up the saw. Upon my arrival back, I set up the mobile base, slid the saw onto the lift and moved it into the shop. We pulled the motor, pulled the worm gears, blade, wheels and everything else. I sanded away all the old paint, and repainted it with the closest color I could find. It had a hammered look when dry. The magnetic switch was mounted ...

Read this entry »


View PurpLev's profile

Adventures in Spraying #3: Piece 1 finished - recap

1479 days ago by PurpLev | 7 comments »

OK, I’m actually already nearing completion of the 2nd piece which looks much better, but for this post, I’ll focus on my first-first experience with spraying, and the overall look, and results. So. After giving the top coat (4th) extra time to dry (~4-6 hours while we were out). I came back and sanded it thoroughly with 600grit sandpaper. the results were mixed: Newly finished piece in front, Original finish to compare in back Cons:1. I had some runs which show in the f...

Read this entry »


View Davidramsey03's profile

Cutting Board Learning #1: First Steps

2189 days ago by Davidramsey03 | 5 comments »

BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE ON IMPROVING THIS WITHOUT BUYING ANYTHING OVER $25, I’D LOVE TO HEAR YOUR ADVICE. THANKS IN ADVANCE!!!!! I bought some clearance pen blanks from Rockler (Pau Ferro, Indian Rosewood, and Cherry, I think). Not having any “larger” tools or super-fine precision tools (band saw, table saw, router table, etc.) I decided I would begin the adventure the “backwoods” way. I Started by laying them together, checki...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase