Hello fellow sawdust makers, Enjoy the video below, I sand and discuss a little of my sanding technique https://www.youtube.com/watch?v=yvvg97_uHJ8
If you carve, cut, sand, or even trim your finger nails (does that include everyone?) then you have got to check out this little rotary tool. This weeks review is on the Dremel 3000.
OK, I’m actually already nearing completion of the 2nd piece which looks much better, but for this post, I’ll focus on my first-first experience with spraying, and the overall look, and results. So. After giving the top coat (4th) extra time to dry (~4-6 hours while we were out). I came back and sanded it thoroughly with 600grit sandpaper. the results were mixed: Newly finished piece in front, Original finish to compare in back Cons:1. I had some runs which show in the f...
Ah… finally some woodworking at last. I don’t really have any time or the mind space lately to focus on construction and creation much, and it felt like I was just collecting tools as of late. All with the preparation of ‘one day’ to be able to get to things. As it happens, I am able to dedicate a little time for some refinishing jobs as I don’t really need to think much for those, and it’s easier for me to get in the zone and just go at it. First ...
I bought a Powermatic 66 at an online auction web site. I paid $350 plus $135 processing. After rental of a truck I drove 158 miles to York PA to pick up the saw. Upon my arrival back, I set up the mobile base, slid the saw onto the lift and moved it into the shop. We pulled the motor, pulled the worm gears, blade, wheels and everything else. I sanded away all the old paint, and repainted it with the closest color I could find. It had a hammered look when dry. The magnetic switch was mounted ...
BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE, I’D LOVE TO HEAR IT. THANKS IN ADVANCE!!!!! Ok, after collecting information from a couple key people, and looking carefully at my pieces, I’ve moved on to Sample #2. First things first. NEW CLAMPS!!!!! Not the best, but all I could get for now. On to business. More blanks, 10 this time. For these, I used a sanding block and norton 3x sandpaper. This was slow, but quiet as it was about 9:00PM when I started, and I’...
BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE ON IMPROVING THIS WITHOUT BUYING ANYTHING OVER $25, I’D LOVE TO HEAR YOUR ADVICE. THANKS IN ADVANCE!!!!! I bought some clearance pen blanks from Rockler (Pau Ferro, Indian Rosewood, and Cherry, I think). Not having any “larger” tools or super-fine precision tools (band saw, table saw, router table, etc.) I decided I would begin the adventure the “backwoods” way. I Started by laying them together, checki...
so just like every other woodworker at one point (what’s up with the other every other woodworkers is beyond me…) I was researching and learning about ways to sharpen my chisels, planes, and other blade tools in the shop. Since I am the weekend warrior at this point, and I do not need to resharpen my tools THAT often, nor THAT much, I figure that I can do without any expensive powertools (there are several of those on the market) to sharpen blades and I dont really have the spa...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 106 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 419 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries