STANLEY BENCH PLANE RESTORATION Click here for large format version PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET More information available on my woodworking blog & podcast The Folding Rule Show Step #1 – Cleaning & Rust Removal I have been inspired by a number of resources to start using my hand planes and start on the slippery slope of a hand plane collection. Not the least of whom has been Wayne, our own Lumberjocks plane guru. Of course I have also explored...
I recently built a primitive cabinet with surface mounted hinges. The hinges were new and looked cheesy on the cabinet. I thought about painting the hinges black- but then decided to rust them instead. Rusting hinges and other metal parts for primitive furniture is EASY and QUICK. 2. Do not use a good pan. (Yes- I learned that the hard way today.) Soak your hinges etc in apple cider vinegar overnight. 3. The next day put equal parts liquid bleach and water in an OLD pan and put your part...
We had a new family move in on our street a few weeks ago, & since they were downsizing from their previous house, they had a lot of stuff they just didn’t want anymore which they ended up just putting in the garage. So, one thing led to another and I got a old table saw. It’s a 1973 Craftsman saw with a 1.5HP 3450 rpm hp induction motor. The top has a moderate amount of rust, most of which was removed in about 10 mins with a wire brush. There’s still some left, which...
So far so good, there are no surprises. No cracks or breaks. As you recall from my previous blog post the vise will not turn. There is no sense of restoring the vise if you can get to move. So this blog is about getting the screw to turn.I searched for woodworking Columbian vise information. There don’t seem to be much. What I have found so far are mostly pictures and mounting information, but not the details that I am after. Hopefully I am correct in my selection of words in describin...
I just got back from a woodworking tool estate sale. There were many good buys. I would of purchase a lot more but ran out of money. I spotted this woodworking vise and noticed that it is a quick release. I already got an old vice for the workbench that I am currently building, but it is not a quick release. I thought I would give it a go. I am taking a chance in buying a vise that wouldn’t turn. For $25.00, I don’t think it is much of a gamble. Here’s what I have foun...
Stanley Block Plane Restoration PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET A couple of days ago I spent some time rehabbing an old block plane that used to sit on the bottom of my steel carpenters box or in my nail bags depending on what I was working on at the time. I was motivated and inspired by fellow LumerJocks Wayne and Matt to pull this plane out and put it to use in the shop. I do not have photos before starting my rehab – maybe a Freudian slip as I would be embarasse...
I’ve got some things with brown stuff on them. Lesser men call it rust; true LJ’s don’t recognize this “rust” as a worthy foe. To follow is a real-time electrolysis setup. . I’m no expert on electrolysis, but being stupid has never stopped me from doing stupid things. I’m going to blog an electrolysisi system for rusty tools in real time. You accept all risk, as I’ll be deemed incompetent pre-trial, so good luck in the civil.. First...
Stanley Bench Plane Restoration UPDATE PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET I have been a bit frustrated, as I can’t use my shop until the outside portion of our house reconstruction is complete which should be very soon. I have been using the down time to restore my Stanley bench plane. As soon as I get back in the shop, I have plans to make a video tool review so I am quite anxious to get going! My Stanley Bench Plane restoration project is near completion. As a remi...
Stanley Bench Plane Restoration UPDATE PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET My Stanley Bench Plane restoration project is progressing well. All parts have been cleaned of rust using the electrolytic rust removal process described in the prior blog entry. I was really impressed with how clean the parts were after the electrolytic de-rusting process. As a reminder, this is NOT a plane with intrinsic collector value. I am restoring this “user plane” to be used on my bench...
Hello all. I am a new member to Lumberjocks, but have been reading the blogs and reviews as a guest for a number of months. I really enjoy how members share their various experiences, so I wanted to contribute mine. I am in the tool buying stage, working towards becoming a novice woodworker. As such, I am constantly searching craigslist and reading woodworking forums. I came across this ad on craigslist for a new in crate Hammer A3 31 jointer/planner – $1500. With such a low p...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries