LumberJocks

Woodworking blog entries tagged with 'roy underhill'

  • Advertise with us
View mafe's profile

The grease box story #1: Roy Underhill's grease box

10-09-2010 04:06 PM by mafe | 30 comments »

The grease box story.Chapter one: Roy Underhill’s grease box Before I begin, I’ll quote myself: ‘If Roy Underhill is a snow storm, then I’m a snow flake’. Since I posted my first grease box here, there have been some discussions going on about the hen and the egg…- Most people never heard about a grease box until Roy Underhill made the dovetailed grease box. - Since I’m Danish and don’t have satellite TV, I never heard about Roy Underhill.Since then my eyes was opened up, and I re...

Read this entry »


View WoodAndShop's profile

The Portable Moravian Workbench at The Woodwright’s School

01-06-2015 01:57 PM by WoodAndShop | 7 comments »

[See this original blog post here] I regularly get asked “Joshua, can you recommend a workbench that is affordable, sturdy, portable, and easy to build?” I used to laugh at the requests. But I recently discovered a historical 18th century workbench that was resurrected from the past by Will Myers, an instructor at Roy Underhill’s The Woodwright’s School in Pittsboro, North Carolina. The old Workbench is part of the Moravian collection at Old Salem, in Winston-Salem, North Carolina. ...

Read this entry »


View WoodAndShop's profile

10 Steps to Getting Started in Traditional Woodworking with Hand Tools #1: Introduction to Joshua's 10 Steps

04-15-2014 02:27 PM by WoodAndShop | 1 comment »

Have you ever wanted to feel the ancient satisfaction of building beautiful wood furniture by hand? Like your great grandfather built? Have you felt a longing to be connected with your ancestors by common work?  Do you want to build a legacy that you can be proud to pass onto your children? Do you want to own and restore gorgeous antique tools that were made so well that they’ll be around for your great grandchildren to use? I’m Joshua Farnsworth, and I have fallen in lo...

Read this entry »


View WoodAndShop's profile

10 Steps to Getting Started in Traditional Woodworking with Hand Tools #2: |Step 1| Understand & Buy the Right Hand Tools

04-15-2014 03:01 PM by WoodAndShop | 6 comments »

1.1 Which Hand Tools Do You Need? After woodworking for several years, conducting “research”, and attending Roy Underhill’s Woodwright’s School, I’ve compiled three lists of hand tools: (1) urgent (what you need to get started), (2) semi-urgent (what you need to do more than just basic projects), and (3) non-urgent (improves convenience, tools for advanced projects, or items that are fun to have, but not vital). Used vintage hand tools are better in most cases (and less expensive), alth...

Read this entry »


View pastorglen's profile

Roy's Mystery Mallet #1: Mallet - 1, Glen - 0

03-03-2012 04:31 PM by pastorglen | 7 comments »

Dear “Saint” Roy, I hate you. Sincerely, Mallet Muttering in Pennsylvania ——— Actually, I don’t hate Roy. And I’m not that disappointed as to this first attempt. If you haven’t gotten the April 2012 issue of Popular Woodworkinghttp://www.popularwoodworking.com/apr12, you need to get it… now. They’ve got a great article by Roy Underhill on making the Mystery Mallet that you’ve been seeing around. ...

Read this entry »


View WoodAndShop's profile

How to Make Mortise and Tenon Joints with Hand Tools (VIDEO)

06-29-2014 02:21 AM by WoodAndShop | 3 comments »

HOW TO MAKE A MORTISE AND TENON JOINT WITH TRADITIONAL HAND TOOLS This video and article will simplify the process of cutting mortise and tenon joints with only a few traditional hand tools. With a little practice, you should be able to make a mortise and tenon joint in under 10 minutes! The video is a quick tutorial, but the below photos and article will clarify how to make a mortise & tenon joint in great detail: ANATOMY OF A MORTISE AND TENON JOINT: WHAT ARE MORTISE...

Read this entry »


View WoodAndShop's profile

How to Cut Half-Lap Dovetails with Hand Tools - at Roy Underhill's Woodwright's School

05-15-2014 12:46 PM by WoodAndShop | 0 comments »

By Joshua Farnsworth (Writer at WoodAndShop.com) I shot the above detailed Video of master joiner Bill Anderson at Roy Underhill’s Woodwright’s School in Pittsboro, North Carolina. Bill shows how to cut a half-lap dovetail joint that covers the bottom groove in dovetail boxes. This excellent joint not only looks amazing, but it hides your grooves! BTW, he used mahogany wood on this joint. View the original blog post here. Yes, this video is longer than my typical videos, but i...

Read this entry »


View WoodAndShop's profile

10 Steps to Getting Started in Traditional Woodworking with Hand Tools #9: |Step 8| Joinery: Learn how to Layout & Cut Joints

04-15-2014 04:52 PM by WoodAndShop | 0 comments »

People called “Joiners” cut joints in wood, in order to get the wood to fit (and stay) together. There are many, many different joints for many different applications. I’ll keep adding joinery videos below (I’m starting with the more basic joints and will move on to more complex joints), so keep checking back. Before watching the videos, checkout this cool woodworking joint chart! (credit: David Royce). 8.1 Learn How to Cut Dovetail Joints Here’s a very detailed 15 step video t...

Read this entry »


View WoodAndShop's profile

10 Steps to Getting Started in Traditional Woodworking with Hand Tools #11: |Step 10| Learn how to Finish the Wood

04-15-2014 05:01 PM by WoodAndShop | 2 comments »

Step 10 is one of my favorite steps, because you get to see the true beauty reveal itself in the wood, and the grain patterns shine forth! I’ll admit it, I’m not one of those woodworkers who love complex finish recipes, but I love making it as simple as possible. In the above video I introduced quite a few of the well-known finishes used by woodworkers (there’s probably a lot more) but I encourage everyone to experiment and find out which finishes they like the best. My favorite, easies...

Read this entry »


View WoodAndShop's profile

How to Use a Stanley 45 Combination Plane to Cut Grooves

05-10-2014 01:47 PM by WoodAndShop | 5 comments »

By Joshua Farnsworth (Writer at WoodAndShop.com) I shot the above Video at Roy Underhill’s Woodwright’s School (original blog post is here). Bill Anderson shows how to properly use a Stanley 45 Combination Plane to cut a simple groove for use in a dovetail box or many other uses. Bill shows the basic parts of the combination plane and how to adjust them. You’ll learn how to hold the Stanley 45 combination plane to get a consistent groove, and how to avoid misshaped grooves...

Read this entry »


1 2 3 4 ... 6 next »
58 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com