Introducing Template Tom the name I was given by my students when giving lessons on the use of the router at the Association for the Blind woodworking group. I was asked to look after for a year after I had been doing some volunteer work for three years previous. The best Class I have ever taught. Average age of the group was 36-82 years of age. A little back ground to consider as it helps to know ‘Who is making such a post’ I began an apprenticeship in Carpentry and Joinery wa...
My router kit came with a centering cone for centering baseplates on the router. It works fine, but I always found it a hassle to chuck in the bit blank and use the cone each time I needed to change baseplates. I frequently change baseplates to switch between bushing guides, large bit profiling, circle guide jigs etc. To solve this problem, I switched the panhead screws out for some tapered machine screws. Now when you screw the baseplate on, it centers itself. One less step each ti...
This is the machine I used to build, ‘Toy Crane’; they’re phenomenal machines. I cut circles and everything else on it. It was the first time I ever used one; in fact ever saw one. That veneer is hard to work without machines made for maching it that have small advance scoring saws; it tears right off of the core. It’s best to score it with a utility knife and use masking tape to prevent tear out.The patterns were covered with a perimeter of elastomer and an ejector created a partia...
I started my Youtube channel series router 101 some time ago, and Ep.7 (of 8) is just out. The link for Episode 1, choosing a router can be found here: Please do take a look, comment and like, be sure to check out all the episodes, there are a lot of tips, tricks, and jig making episodes within the full series.
I picked up an AKEDA DC 16 Dovetail Jig on eBay about a week ago and it got here this last Tuesday. It’s in great shape. Most of the bits still have the coating on them and most of the parts were not opened. Now I do wish it was the BC 24 but those are on Backorder until who knows when so I had to go with what I could get. I decided to go with the Akeda after speaking with Kevan, the designer, about what I would be using it for. He offered some great insight and I am confident that I ma...
- My Journey As A Scroll Saw Pattern Designer - 1184 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1206 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 299 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 201 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- BritBoxmaker - 159 entries
- shipwright - 159 entries
- scottb - 144 entries