I started my Youtube channel series router 101 some time ago, and Ep.7 (of 8) is just out. The link for Episode 1, choosing a router can be found here: Please do take a look, comment and like, be sure to check out all the episodes, there are a lot of tips, tricks, and jig making episodes within the full series.
My router kit came with a centering cone for centering baseplates on the router. It works fine, but I always found it a hassle to chuck in the bit blank and use the cone each time I needed to change baseplates. I frequently change baseplates to switch between bushing guides, large bit profiling, circle guide jigs etc. To solve this problem, I switched the panhead screws out for some tapered machine screws. Now when you screw the baseplate on, it centers itself. One less step each ti...
This is the machine I used to build, ‘Toy Crane’; they’re phenomenal machines. I cut circles and everything else on it. It was the first time I ever used one; in fact ever saw one. That veneer is hard to work without machines made for maching it that have small advance scoring saws; it tears right off of the core. It’s best to score it with a utility knife and use masking tape to prevent tear out.The patterns were covered with a perimeter of elastomer and an ejector created a partia...
I picked up an AKEDA DC 16 Dovetail Jig on eBay about a week ago and it got here this last Tuesday. It’s in great shape. Most of the bits still have the coating on them and most of the parts were not opened. Now I do wish it was the BC 24 but those are on Backorder until who knows when so I had to go with what I could get. I decided to go with the Akeda after speaking with Kevan, the designer, about what I would be using it for. He offered some great insight and I am confident that I ma...
Introducing Template Tom the name I was given by my students when giving lessons on the use of the router at the Association for the Blind woodworking group. I was asked to look after for a year after I had been doing some volunteer work for three years previous. The best Class I have ever taught. Average age of the group was 36-82 years of age. A little back ground to consider as it helps to know ‘Who is making such a post’ I began an apprenticeship in Carpentry and Joinery wa...
- My Journey As A Creative Designer - Woodworking and Beyond - 1730 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1755 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 238 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 207 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries