Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...
Well, I was asked to put together a blog on how I made my segmentd ring. Since I had to make a new one for myself, (first one too small) I thought I would go ahead and do a step by step picture tutorial. My first time ever doing something like this , so hope it comes out OK. Here goes; Wood Selection The first step in making the ring is deciding what woods to use. As we all know, the selection is quite large. One of the most important things is color, but the most important is hardne...
Awhile back Wood Magazine had an article on building a mobile outfeed table that would fit over your table saw. Since I need all the space in my garage I can get, I went ahead and built one that would fit over my table saw to give me some much needed work space and a handy outfeed table. I thought this was pretty spiffy and a great use of space. As I always do I look at the latest project posts on Lumberjocks looking for inspiration for my next project. Whilst browsing I came ac...
Since the original EZ mitre blog there have been variations added. To formalise the adding of new and/or additional methods to the technique I will add updates for now and re-release the whole thing if I ever get time. The main reason for this update is, as has often been asked, ‘can this technique be done using a table mounted router and ‘v’ groove bit ?’ Up until now I have been reticent to suggest this but I have just this week discovered router bits that are up ...
Part 3updated 1/15/12 Regarding size:Size and proportions are important…to a point. We will be building a box that will start out at 11 1/8 W x 7 D x 4 1/2 H. (After shaping it will finish out at about 10 3/4’’ x 6 3/4’’ x 3 1/8 h depending on how much shaping is done.) I like the proportions of this box, they just look good to my eye. They are loosely based on the Golden Ratio which is a ratio of 1.618. There is much more to it than that, but simply put, here is how it works in rela...
Here is how I made my Intersected cutting board posted here. There seems to be a lot of interest in this board so here is a blog on how I made it. First of all here’s what I planned on making. It’s the top one. After I got both the circles intersected I liked how it looked with the rounded corners so I just added in the “wedge shapes”at the top and bottom and called it done. I think that it makes it very distinctive also. As one person guessed I ...
I have a love affair with wooden hinges and this challenge gave me the opportunity to go one step further with them. (It started some years ago when I came across the work of the late Tim Stead – in my opinion, a genius.) Accurately drilling the hinge pin hole in such a hinge is never easy, and those I planned for this box are 9.5” long and therefore impossible to drill. The following is an attempt to show how I overcame this bit of the challenge. The first shot shows the oak blan...
Sorry about the delay in posting this tutorial of the series. I ran into some technical difficulties… which is another way of saying I sometimes have the attention span of a gnat and messed things up the first time around. Speaking of messing things up, I’ve injured my knee and have to stay off my feet for a few days. I am only on day two and already going crazy. All in all, it looks a good time for going on with this toot toot tootorial series. —...
Updated 1/15/12 The “Art Box” concept came about when I was looking for a way to use small pieces of some figured Myrtlewood I had leftover, not large enough for a box, but not something I could not throw away either. I decided to feature it in the lid of a box, like a picture in a frame. Keep that picture frame in mind when selecting the small piece for the medallion. You might select that picture piece first and then find a less figured wood to use for the lid and body, one that sets it...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries