Hi everybody…....My husband finally got the floor finished…...he did a fantastic job I might add and now…..I finally sucked up enough courage to get started on my kitchen cabinets. The kitchen and dining area is 14 ft wide x 24.6 ft long. My cabinets are made of plywood and my face frames and doors are made out of hickory. I have never worked on a set of kitchen cabinets before, so I am pretty much learning this on my own. I have a friend on here that gives me advice whe...
When we left subject cabinet, the last part of the build was done, as the upper door pieces were cut and fit and glued up. Stiles ran long on the doors, as Lysdexic correctly pointed out, to prevent spitting of the entire stile while the mortises were cut. So we know the doors needed a trim length wise. What I didn’t realize is how close I had made it re: the rails. You can see in the pics below I had to preserve all of the rail material… Whew… There was ve...
Maybe “LOVE” is a strong word. But I’m really excited about the final version of the show, and I think most people will feel the same way. Forget about everything we experimented with before. This is all new. It’s been over a year in development, and And I’d like to think it is a pretty unique format! Here’s how it works… The show is designed to have the feel of a single camera “reality” type show. It is meant to be a glimpse into our workshop as if you were just stopping in...
Hello. This is a video showing the process I go through to make wooden screws. I briefly try to explain how it is set up and show the jig making the screw. I will soon have a video on making wooden nuts aswell. I will eventually make a video showing how to make the tap and screw making jig and explain how to create the size of screw you want. I’m sure there are many other ways to make nuts and screws but this is how I do it and it works fairly well, the main downside being that I can ge...
OK, so yeah – another blog about a router table, but since I’m going to make one , might as well document it while I go, maybe someone can benefit from this. I’ve had a Rockler router table top + plate + fence which I got when I bought my router (Bosch 2 1/4hp). It had the misfurtune of being on the floor when my basement was flooded a couple of years ago, so that top was ruined. I since have been planning to replace it with a shop-built version, and make a full enclosed ...
Sorry about the delay in posting this tutorial of the series. I ran into some technical difficulties… which is another way of saying I sometimes have the attention span of a gnat and messed things up the first time around. Speaking of messing things up, I’ve injured my knee and have to stay off my feet for a few days. I am only on day two and already going crazy. All in all, it looks a good time for going on with this toot toot tootorial series. —...
Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...
I have a love affair with wooden hinges and this challenge gave me the opportunity to go one step further with them. (It started some years ago when I came across the work of the late Tim Stead – in my opinion, a genius.) Accurately drilling the hinge pin hole in such a hinge is never easy, and those I planned for this box are 9.5” long and therefore impossible to drill. The following is an attempt to show how I overcame this bit of the challenge. The first shot shows the oak blan...
- My Journey As A Scroll Saw Pattern Designer - 1660 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1685 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 225 entries
- Stevinmarin - 212 entries
- stefang - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 201 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries