LumberJocks

Woodworking blog entries tagged with 'router plane'

  • Advertise with us
View mafe's profile

Small router plane tutorial blog

1181 days ago by mafe | 40 comments »

Small router plane tutorialanother of my tool making journeys I have a Stanley and a Record router plane, but sometimes it would be wonderful with a small router plane, I have been looking at the Veritas small router plane, but thought it could be fun to make my own, so when I purchased some stuff from Lee Valley I also ordered a 9,5 dollar Veritas blade for their small router. This little blade has then been resting in my plane cabinet until I had the right idea for a design, at first I j...

Read this entry »


View Dave's profile

refurbishing old tools #12: Stanley 71

959 days ago by Dave | 34 comments »

I won a bid on eBay for a Stanley 71 for $19.02 plus shipping. I was very pleased for the chance to own such a fine plane. Here is the picture that was posted on eBay. And here is a bit of a break down when I received it. After break down. Sorry no pictures of the process. I wiped everything down with acetone and a wire brush. I took my roto tool and got the rust out of all the nooks and cracks. The original finish was only 60 percent there. I am wanting a good clean user th...

Read this entry »


View RGtools's profile

Occasional Table Class (Hand Tool Build) #7: The tool kit part 5 (lifesavers)

1063 days ago by RGtools | 13 comments »

Both of these tools are very optional for the build…in fact I hope you don’t need these. I really do. I would love it if all your tenons come out perfect and that all of your planed surfaces come out gleaming and wonderful. If not… Card Scrapers will remove tear-out from even the most persnickety woods. They are cheap tools (you can even use a sacrificed saw blade…I have, and they work fine if you pick one without pitting near the cutting edge) but if you gra...

Read this entry »


View ShannonRogers's profile

A trip to Lie Nielsen...

2173 days ago by ShannonRogers | 13 comments »

The following is excerpted from my blog, The Renaissance Woodworker. I hope you enjoy it. We had less than perfect weather this year in Maine and while it made for bad kayaking and sun bathing, it was great for a pilgrimage to Warren, ME. Just up the road from the world famous Moody's diner you see that telltale red roof come into view. When you first step through the door into the showroom, you cannot help but take a deep breath and sigh. It is a beautiful showroom done in all h...

Read this entry »


View Brad's profile

Vintage Tool Rehab Projects #17: Rehabbing a SB Router Plane #71 Type 8

673 days ago by Brad | 9 comments »

My tool kit has longed for a router plane for some time. Why? • Because my dados need their bottoms flattened to a consistent depth.• Because my rabbets need to be trued—and to the same depth.• Because my tenons need to be trued too.• Because I wanted to do these functions accurately by hand versus a power router.• Because my Stanley family was anxious to add a new brother to the mix. But where to find one?In the year I’ve been combing estate and garage sales I̵...

Read this entry »


View nobuckle's profile

Making a Router Plane

493 days ago by nobuckle | 7 comments »

Ever since I saw Mafe's router plane I’ve had the desire to make one. As I do most often I look here on LJs for inspiration. Well, I found it. As I searched I came across this gem of a router plane made by Tinnocker. Tinnocker got his inspiration from Mafe’s design as well. I used a picture of Tinnockers design to come up with my version of a router plane. The body of the plane is hard maple. The handles are from some old chair spindles I had laying around, The plane iron is a ...

Read this entry »


View Mark Shymanski's profile

Assiniiboine Community College Woodworking course #4: Half way done :-(

1279 days ago by Mark Shymanski | 5 comments »

Hello, posting this a bit late because I had to go to Winnipeg early on Thursday so had to get up early which meant I had to hit the hay as soon as I got home :-( It was a great course we essentially just worked on the nail tray project, laying out the cutlist on the wood, then dimensioning the wood. Really just learning how to interpret the drawings and instructions. There was one huge, significant and really cooolll thing Ryan introduced to us…THE ROUTER PLANE!!!! This is such...

Read this entry »


View John's profile

Roubo-ish Workbench #3: Paul Sellers poor man's router plane

571 days ago by John | 4 comments »

working on the legs, 8 4×4s lined up chopping dados with my old POS craftsman chisels. router plane idea from Paul Sellers… http://m.youtube.com/#/watch?v=B_2a_FwjAgk&desktop_uri=%2Fwatch%3Fv%3DB_2a_FwjAgk worked like a champ!

Read this entry »


View bayspt's profile

router plane #1: the begining

1346 days ago by bayspt | 4 comments »

In the process of makeing a router plane. Check it out on my blog at the Red Dirt Wood Shop.

Read this entry »


View llwynog's profile

Rounding Plane / Dowel Maker attempt #3: Tool making gone fractal + finishing the blade holder

872 days ago by llwynog | 3 comments »

If I ever succeed in making a usable rounding plane, it will be a tool to be used with a tool to make a tool.The rounding plane makes a dowel, which is used with a wood die to shape a thread in order to make a clamp such as these http://lumberjocks.com/projects/49549 Then it got convoluted when I realized that I needed yet another tool to be able to recess the blade into the blade holder somewhat accurately.As I do not own a router plane and as I did not wish to use my electric router, my ...

Read this entry »


1 2 next »
13 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase