1246 days ago
by GoGoZRX |
0 comments »
http://www.blackroses.com/~skip/woodturning/problems/
I picked up some 4F pumice and some rottenstone… I sanded to 400, then used the pumice. I put some of the paraffin oil on a rag, and sprinkled on the pumice. Needless to say, I was quite surprised when the white powder turned ashy, but I cranked up the speed on the lathe and went at it. In short order, the surface was gleaming!“I can’t wait to try out the rottenstone!” Or so I thought…
it seems to have gotten into the ?pores? of the ...
Read this entry »
2177 days ago
by Karson |
17 comments »
The continuation of the Pumice and rottenstone as wood fillers.
I let the BLO (Boiled Linseed Oil) harden for 1 week on the boards.This is my spraying table that I use. The bottom is on a lazy susan swivel so that it can turn 360 Degrees. I made a block that I can set on top of it that has a bunch of screws through the plywood so that I can put items on top of the screw points and not have the wood sitting on the flat surface and get finish creep under the boards.
The spray gun that us...
Read this entry »
