I’ve wanted a vise for quite some time. I was finally able to get one with some money I received for Christmas. I went with the Rockler quick-release front vise. I wanted the Veritas one, but there were other things I needed as well, so I went with the cheaper option so that I could get those other things. I don’t have a workbench yet, so it was a little more difficult to install in the worktable which I built before I really knew what I needed. It’s really just a big...
Review of the Rockler Dust Right Cord and Hose Holder
This week’s Project is a horizontal Murphy Bed. The bed I built is a twin size bed using the Create-A-Bed Hardware kit from Rockler Woodworking and Supply. The finished look of the bed can be trimmed and finished to match your homes decor, really the limit on the final look is only limited by your imagination. These videos just tell you about the use of the hardware kit and the general construction of the project. I hope you enjoy it.
Trying out the Rockler Carbide Mini Turning Tool. A Review of this tool reviled a highly crafted turning tool.
Can I get your vote? I will appreciate your support! Here is the link: https://woobox.com/5w2esk/vote
Rockler Woodworking and Hardware is holding a video contest. And you are invited to join in. Submit a video telling what inspires you to be a Woodworker for a chance to win some great prizes.Click here to enter! If you aren’t planning to enter the contest, you can help me out by voting for my entry. The top prize is one that would really help get my new shop geared up. To vote for my entry Click here! any and all supporting votes would be greatly appreciated. ...
I recently picked up a sign making jig from Rockler. Here is my review and a sample project that I was able to do. As always you can check out my site over at: www.woodlogger.com for more picture/videos of what I’m doing in my shop.
Testing out Rockler’s All-In-One Mix, Pour, and Store Solution the Mixing Mate.
After some success with pens and a few bottle stoppers, I decided a bowl was overdue. I picked up a couple 2×6 rounds last week of curly maple and decided to see what kind of bowl I could fashion from one. I located center and attached the faceplate with some screws. My intention was to cut the bottom of the bowl for the Nova Chuck and shape it as much I could before turning it around and hollowing out the inside. I made the recess and shape the outside curve then sanded it to 600 grit. ...
Hi guys! yesterday arrived 6 boxes 4 from rockler and 2 from incra. we organized a comunity buy between 7 woodworkers, some profesionals, some hobbist, we took advantage of 15% rockler discount and buying al together was a save of USD140 aprox in shipping and handling charges, compared to buying each of us separated. There was a lot of things… they arrived to my office (we are an internet software developing company) so people looked at me with strange faces :D. luckily I had a small...
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 215 entries
- stefang - 215 entries
- Stevinmarin - 212 entries
- Dave Rutan - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries