I thought folks might be interested in seeing the steps that I take to make a Maloof style rocker. Perhaps after seeing how it isn’t really all that difficult to make one it might give encouragement to try and make one yourselves.These steps are for a mahogany rocker that I’ve finished.Started with quite a large slab of mahogany. This photo is after cutting 4 ft. from 1 end. This is 1 of many templates I use. I don’t have to do any measuring for many of the necessary ...
My daughter is pregnant and I though I surprise her with a rocker for her first born. The rocker will be made of leopardwood and walnut. I got 8/4 ash for the laminate forms. I’ll have about 6 hours a week to work on it so it will take most of the winter. I haven’t ever made a rocker so I bought the plans from Hal Taylor and I’m already glad I didn’t try it on my own. Day oneI bought some 1/2” baltic birch for the chair patterns, cut them on the bands...
A deep red mahogany finish doesn’t have to be the result of a complicated process. I’ll show you how I use a simple two-step method to revitalize my mother in law’s old beat up rocking char. First, a coat of General Finishes Merlot Water-Based Dye. Second, a coat of General Finishes Brown Mahogany Gel Stain. Its all finished off with a nice satin lacquer topcoat. Topics Covered: Application tips for water-based dyes Application tips for gel stains The co...
I’ve been wanting to build a Maloof style rocker for about as long as I’ve been a woodworker (about 4 years I think)... I always put it off thinking that my skills werent there yet (still think that). I decided I’d wait until my wife and I were expecting our first child, and then I’d take the plunge and build one. Well, here we are. I need to have the chair done by Oct 5 :). So, my other project is going to have to wait (Arts and Crafts Dining Table). I started...
My woodworker friends… Here is a brief video showing the steps involved in sculpting a Maloof Inspired rocker seat. I hope you enjoy seeing the dust fly! Sculpting a Maloof Rocker Seat>
This was my first rocking chair I made, I built it about 3 months ago, actually did a blog on here about the build but never actually posted up final pictures actually this is the blog…..lol I’ve since built 4 more chairs out of various woods, this one was built using wormy soft maple that my brother had cut about 10 years ago from the bush behind my house. I gave this chair to my grandparents, as I didn’t fell that I could sell my first one also the ” quality ...
How to build a Custom Sculptured rocking chair Lesson # 1 Here is the free class text you wanted. It is complete and you can build a rocker using it. If you are following along with the Web Class and are anxious to upload the new text before I am able to post it to the Web Class site you can send me an email firstname.lastname@example.org and request the next lesson. You now have three choices: (1) Send me an email for the Free text in which case this Free text will give you all you need to kno...
I recently took a Maloof Rocker class with Randy Child and Charles Neil. They were both kind enough to let me video the learning sections of the class. In this video, Randy discusses the requirements for prepping the front legs to integrate with the seat. I have lots of video but most of it has high levels of noise. If there is interest given these restraints, I will post a few more. As for the class itself, I really learned quite a bit about shaping wood which is the largest require...
In this video Randy Child discusses the use of the rasp in shaping wood and demonstrates its use. My apologies in advance for the noise. I filmed this in a production environment of which I had no control. That said, you can still hear the content which I believe is relevant. Enjoy! Tim PS – Check out my website for more videos and woodworking information.
In this video, I show how a Maloof Rocking Chair arms are shaped. Get your dust masks on and <cough> get ready to make some sawdust. Shaping Maloof Style Rocking Chair Arms>
- My Journey As A Creative Designer - Woodworking and Beyond - 1807 parts
- Extremely Average - 324 parts
- Toy costruction - 128 parts
- A journey into the workshop. - 112 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 90 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1832 entries
- dbhost - 439 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 320 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 245 entries
- Dave Rutan - 245 entries
- Betsy - 228 entries
- stefang - 221 entries
- A Slice of Wood Workshop - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- bandit571 - 201 entries