After picking up the Chinese elm logs the other day, I noticed hours later they were rapidly beginning to check. I headed out a few hours after that to seal them up, and of course, a few hours later it was raining. The not-yet-dry Anchorseal began to wash away: My truck bed ran white with wax: And so did my driveway: The following day I moved the pieces to the back yard, shortly before it began to rain again. I put them under the Hollywood junipers, where the thick fo...
The mother-in-law has been nagging me to build this “table” for about a year. The problem is, she wants something different every time I talk to her about it. She’s settled on 79”x30” at about 38” tall. She wants square legs, 3 sides enclosed, and two shelves. Oh, and she wants it made out of knotty pine to look distressed. So I started it last weekend. Went to Home Depot for some 2×6’s and 2×4’s. Then i glued then squared up ...
I’d like to thank you, junipercanyon , for your advice on chain sharpening for ripping. Man, what a difference. I figured since you advised somewhere between 0 and 10 degrees I’d split the difference and go with 5 degrees. Slabbed all three in less time than it took me to do the first cut in Phase 1 of this project. This is some really fantastic wood I’m working with, and I can only hope to be able to score more of it in the future. Step 1: Scribe the lines:I used a laser...
Well, the wall hasn’t gone up yet – the start got postponed a day or so. And I had time to start ripping down the yellow pine 2×12s This proved interesting, so I thought I would post a short snippet about that. I ran into a frustrating problem so I will probably post this on the forum as well. My plan is to build a big heavy Holtzapffel bench a la Chris Schwartz et al. Supposedly, yellow pine is a good candidate, strong, heavy and relatively cheap. I’ve never us...
Even the most seasoned sawyer can dread a long session of ripping down stock by hand. There are quite a few ways to prevent yourself from burning out, but my personal favorite is to use different muscle groups as I go along. I will start by ripping on my saw-bench, kneeling on my work. As I go along I switch to this position. It may look awkward, but it’s rather comfortable and gives you an excellent view of your saw for keeping it both plumb and on your cut line. It...
I have known that I wanted to build a Roubo bench for a long while now. A few months ago, more than I want to try and figure out, I purchased enough 2×10x12’ hem-fir to build a bench 24” x 60” with 3” square legs and a 3” thick top. I brought the unwieldy 12’ long boards home and cut them all in half on my back deck then brought them down to the basement and stacked them temporarily (read improperly). It was at this point I undertook a wedding gift ...
Hi fellow sawdust creators,In the pause during this week before I actually touch my Unisaw again on Saturday, I thought I would share my new blades that will soon be doing 10’s of thousands of revolutions and ripping, crosscutting and mitering their way to oblivion… Introducing the four new additions to the “blade brigade”........ May I present “Lord Combination”, offering a variety of talents to his royal highness, ME Please welcome “The Duk...
Binding while ripping and Riving Knife Drag We have read any number of posts on this and other sites about problems encountered when ripping lumber and the search for solutions. The most probable cause is case hardening of the lumber. Red Oak is often steam dried. Rushing the drying cycle, and/or having insufficient ventilation between materials in the kiln, among other reasons, can cause tension in the lumber. European Beech, Cherry and Black Walnut are other species that are often ste...
1 Sun-6.76 Bu x 3 Sun-3.52 Bu x 8 Shaku-4.69 Bu The Multi-Purposed 2×4—-Notes:1.) ....hand sawing, (ripping) the species of wood, (white oak) out of a slab that was mill-cut from a tree some years ago…. 2.) ....this piece of white oak is at the moment, still in 2’‘x6’‘x9’ of it’s original condition….after having previously hand sawed, (cross-cut) 1’ in length from one end….3.) ....there is a nice crack in the wood, running for 4...
Wood Ballet Dancing in the FreeHand And so it’s time, time to get back on track here and answer some questions, plus try to give an understanding to any and all that want to try this type of slabbin’ at wood. One of the issuing egresses that make my projects so long, is the time and effort I take in the planning of the project from start to finish. I really do try and make use of telling the truth, that when I say ‘hand made’ the ‘wood art’ that I co...
- My Journey As A Scroll Saw Pattern Designer - 1199 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 67 parts
- As The Lathe Turns - 67 parts
- Sheila Landry (scrollgirl) - 1221 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 333 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 208 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 146 entries