LumberJocks

Woodworking blog entries tagged with 'redheart'

  • Advertise with us
View KoryK's profile

Intarsia Basics #6: We are Almost There!!

06-25-2012 01:00 AM by KoryK | 13 comments »

Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...

Read this entry »


View KoryK's profile

Intarsia Basics #2: Preparing Your Wood and Pattern for Cutting

04-11-2012 01:20 AM by KoryK | 18 comments »

Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...

Read this entry »


View KoryK's profile

Intarsia Basics #5: Welcome back, Let's Start Adding Spacers and Shaping Our Pieces

05-24-2012 03:01 AM by KoryK | 11 comments »

Thanks for joining in again and I apologize for the delay. Hand is doing a lot better and it feels great to be back in the shop. Thanks for your patience and your encouragement to get better. In this section we will focus on shaping and sanding our pieces. In my opinion, this is the most important part of the process. Depth is what makes a piece really stand out and the more depth you use in your project the better you’re going to like the end result. We have all seen intarsia pieces...

Read this entry »


View KoryK's profile

Intarsia Basics #3: Let’s Do Some Cutting!

04-19-2012 02:25 AM by KoryK | 9 comments »

Thanks for joining us for the third installment of “Intarsia Basics” and this is where it starts to get really fun. Cutting out the pattern is one of the best parts of doing this kind of art. It takes a little practice to get used to using your saw. You can look up some practice patterns or just make some zig zags, loop the loops, straight lines, gentle curves, and circles on a piece of paper and glue to a practice board. Cut out some of these and you will start getting used to the “feel ...

Read this entry »


View Elwood89's profile

Patchwork Table #2: Afghan Carpet Inspired

07-11-2011 03:37 PM by Elwood89 | 3 comments »

I liked the first patchwork coffee table that I made so much that I’m making another one. With improvements of course. Start with a lot of different exotic woods. Thanks to www.exoticwoodsusa.com I started with 2” thick blocks of wood and resawed them to 1” (so I have enough left over to make another table). Make them look pretty (easy to do with this wood). This table was inspired in part by a carpet that I got in Afghanistan a few years ago… The ta...

Read this entry »


View Pooka's profile

Cane With Character

03-09-2014 12:01 AM by Pooka | 0 comments »

I jumped the back fence several months ago. We have a canyon out there and there is a lot of deadfall and detritus that I like to rummage through for odds and ends that might make interesting additions to my project list. The last adventure uncovered this length of acacia which I thought might make a neat cane. It’s very hard wood, so carving it has taken a lot of hours. Obviously, the thing can’t get chucked up on my lathe, so I took some killer grinding bits to it with my ...

Read this entry »


View WoodJediNTraining's profile

My first Turning Project

06-10-2013 06:31 PM by WoodJediNTraining | 9 comments »

For a very long time now I have been wanting to learn how to turn on a lathe. Well recently I was able to purchase a lathe using a Gift card I won thanks to your votes. My first project, wow, well since I am a fan of pen turning, I thought that would be the place to start. So I turned a Bullet Pen. This is a 30 caliber bolt action bullet pen kit and man is it cool. I will be making more of these for sure. I really enjoyed turning and I can see where I will be doing a lot of it in the future a...

Read this entry »


View KoryK's profile

Intarsia Basics #4: Part 4 Coming Soon (Sorry)!!!!

05-03-2012 03:02 AM by KoryK | 9 comments »

I just wanted to update on the status of the class and inform every one of the delay. For those of you that do not know, I had a misfortunate (stupid?) accident and broke a bone in my right hand a couple of weeks ago. I was hoping that I had progressed far enough beforehand that it would not affect the class. Unfortunately the bones are not healing correctly and it is taking longer for ir it to heal. I tried again tonight, but do not have enough dexterity or hand strength to sand while I...

Read this entry »


View Lisa Chan's profile

Spindles #3: It's been a while, but I haven't been unproductive!

01-25-2010 07:39 PM by Lisa Chan | 9 comments »

I’ve been doing nothing but perfecting my turning for Russian-style lace spindles. I even experimented with French spindles too. People have noticed and I have been sending off a freshly turned spindle to a far flung corner of the United States at the rate of about one a week. Between that and teaching classes, I had to go out and get a proper business license and start paying taxes. I would like to branch out to some other areas as well, but right now my heart is in practicing my...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase