I wanted to share my video with everyone here on a project I am working on. The main detail is a cherry blossom inlay at the footboard (in the video) and headboard (soon to be part of the bed build video). Each piece was cut out by hand using a fret saw and set into place using a 1/16” straight router bit. Let me know what you think. The main headboard panel is 5” x 20” and took 63 hours to complete. The piece in the video is 2.5” x 5” and took about 27 hours...
I jumped the back fence several months ago. We have a canyon out there and there is a lot of deadfall and detritus that I like to rummage through for odds and ends that might make interesting additions to my project list. The last adventure uncovered this length of acacia which I thought might make a neat cane. It’s very hard wood, so carving it has taken a lot of hours. Obviously, the thing can’t get chucked up on my lathe, so I took some killer grinding bits to it with my ...
For a very long time now I have been wanting to learn how to turn on a lathe. Well recently I was able to purchase a lathe using a Gift card I won thanks to your votes. My first project, wow, well since I am a fan of pen turning, I thought that would be the place to start. So I turned a Bullet Pen. This is a 30 caliber bolt action bullet pen kit and man is it cool. I will be making more of these for sure. I really enjoyed turning and I can see where I will be doing a lot of it in the future a...
Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...
Thanks for joining in again and I apologize for the delay. Hand is doing a lot better and it feels great to be back in the shop. Thanks for your patience and your encouragement to get better. In this section we will focus on shaping and sanding our pieces. In my opinion, this is the most important part of the process. Depth is what makes a piece really stand out and the more depth you use in your project the better you’re going to like the end result. We have all seen intarsia pieces...
I just wanted to update on the status of the class and inform every one of the delay. For those of you that do not know, I had a misfortunate (stupid?) accident and broke a bone in my right hand a couple of weeks ago. I was hoping that I had progressed far enough beforehand that it would not affect the class. Unfortunately the bones are not healing correctly and it is taking longer for ir it to heal. I tried again tonight, but do not have enough dexterity or hand strength to sand while I...
Thanks for joining us for the third installment of “Intarsia Basics” and this is where it starts to get really fun. Cutting out the pattern is one of the best parts of doing this kind of art. It takes a little practice to get used to using your saw. You can look up some practice patterns or just make some zig zags, loop the loops, straight lines, gentle curves, and circles on a piece of paper and glue to a practice board. Cut out some of these and you will start getting used to the “feel ...
Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...
I liked the first patchwork coffee table that I made so much that I’m making another one. With improvements of course. Start with a lot of different exotic woods. Thanks to www.exoticwoodsusa.com I started with 2” thick blocks of wood and resawed them to 1” (so I have enough left over to make another table). Make them look pretty (easy to do with this wood). This table was inspired in part by a carpet that I got in Afghanistan a few years ago… The ta...
I’ve been doing nothing but perfecting my turning for Russian-style lace spindles. I even experimented with French spindles too. People have noticed and I have been sending off a freshly turned spindle to a far flung corner of the United States at the rate of about one a week. Between that and teaching classes, I had to go out and get a proper business license and start paying taxes. I would like to branch out to some other areas as well, but right now my heart is in practicing my...
- My Journey As A Creative Designer - Woodworking and Beyond - 1823 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- Shop stuff - 81 parts
- Sheila Landry (scrollgirl) - 1848 entries
- dbhost - 450 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 273 entries
- William - 258 entries
- robscastle - 256 entries
- shipwright - 255 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 227 entries
- bandit571 - 224 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries