See this post and more at Pallet Craft Hello Readers! You have probably seen lots of things made from pallets on the Internet, from chairs to storage and much more. However there is a key distinction between building projects from pallets and building projects with pallet wood. While both of these methods are recycling the pallet wood and putting them to good use (which I applaud), I want to show that the wood from these pallets can be turned into beautiful pieces instead of usin...
Given a better computerdesk I recycle parts from my old desk to modify a stand from the new desk.
Hello Readers! Well from the title of this entry, you can probably guess what this is about. Yes, Halloween has not even come yet; Yes, Thanksgiving is more than a month away! But I have learned that planning and starting now will give me the time I need to get the projects done. Why wait until the snow is falling and the bitter cold bites? So what will I be building? Well that is a secret and I will post all about them on December 26th and 27th. I don’t want any gift receivers to...
To date, the most time I’ve spent at the lathe was 3 hours – and that was in a small classroom setting practing beads and coves – 1/2 the time playing and getting a feel for the tools, and the rest of the time trying to make deliberate shapes – while contantly dealing with catches. Today, I began working on my wood joinery/garden project. 1 hour of planning and cutting, 4 hours straight at the lathe! Also to date, the longest things I’ve turned came in around ...
Was running out of daylight to take pictures in, so I had to finish quick… here’s the pieces: and here's the project
Hello Readers! Just a quick update: I got plans for the maloof chair, so I will be studying these extensively for my build. My wife has been perusing pinterest and the internet and has stumpled upon a few DIY pallet creations that she loves and wants me to recreate. Well its safe to say I am at no shortage of projects now… Here are a few of the projects she has in mind (more at my blog, I could not fit them all in this post): Now you might have noticed if you read m...
For more on this and other posts, visit: Pallet Craft! Hey all! Today I have something cool to share! So we just got a bunk bed (see my blog for type) second hand for my daughter to have in her room.As we were building it we were saying to ourselves that we wanted to put her stuffed animals on the bottom, but we did not have a second mattress yet and the bottom only had a metal wire support. It was safe to say we wanted to put something on it that would be better than bare metal! My wif...
Readers of my previous post in this series will remember that ol’ Pappy has undergone a transformation of late: my newfound obsession with woodworking has come with unexpected side effects, namely the urge to recover every ounce of usable wood from a premature end. It’s taken over a goodly share of me mental facilities (which didn’t necessarily have a lot of room to spare to start with.) Marching under this new banner of Responsible Resource Use I arrived at work the oth...
Find this and more at Pallet Craft! Hello Readers! Well everyone goes through a learning period when figuring out what can and can’t be done, and how you should and should not go about things. Here are a couple of my latest “woops” and “oh…” moments as a beginner at woodworking. 1. The wooden vice. I thought this would be a great idea and it seemed to work well in pre-applied testing. Unfortunately the threads are too few, and the wood I used for t...
A little over 25 years ago I made a Stereo Racking Stand for my 80’s stereo separates. Its still in use today Its made of Pine veneered chipboard with softwood legs. A little while ago I scored a vintage Bang and Olufsen 80’s music centre (perched on top of the stand) from our local Freecycle ( web site where unwanted goods are placed, up for grabs, for FREE). Why? you may be asking yourselves. Well for it’s day it was top of the range. With remote control which all b...
- My Journey As A Scroll Saw Pattern Designer - 1584 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1609 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 186 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries