LumberJocks

Woodworking blog entries tagged with 'quartersawn'

  • Advertise with us
View Mark A. DeCou's profile

Charles Rohlfs Oak Desk, Stickley Ellis Table & Iconic Crafts, Nelson Atkins Art Gallery Kansas City

04-30-2012 05:23 PM by Mark A. DeCou | 23 comments »

Wow! I made it, I finally made it, and oh what a surprise to find a museum with Iconic Furniture pieces intermixed with a lot of European, Asian, Native American, Egyptian, and some strange Contemporary Stuff that someone else calls “art”. ————————- WARNING: If you are easily offended by my silly notions of what looks good and is well built, please don’t read any farther. I’m just giving my opinions, that is what ...

Read this entry »


View pintodeluxe's profile

Stickley / Jeff Jewitt Arts and Crafts Finish

04-15-2013 01:24 AM by pintodeluxe | 14 comments »

I wanted to recreate this Jeff Jewitt finish from Fine Woodworking #157, however the article didn’t list which formula was used. I consulted with Jeff, and it was Transtint Brown Mohogany dye, followed by McCloskeys Walnut stain. McClosky no longer makes stain, but sold to Valspar / Cabot. ---So I set out to make a sample board to achieve the rich, dark color I was after. ---The top colors are stain only, the middle colors are dye first then stain, and the bottom color is dye only. ...

Read this entry »


View John Nixon's profile

Video Journey - Oak Dovetailed Blanket Chest

10-29-2007 01:30 PM by John Nixon | 13 comments »

I recently finished a dovetailed blanket chest as a wedding gift for my good friend. I think it came out pretty nice. I was able to get it into his house while he was away on his honeymoon. He and his new bride really loved it! It’s a great feeling knowing that they will have this gift and cherish it forever. I made a video about the entire process.Here’s a link to the video. Check it out, and leave a comment telling me what you think:http://www.eaglelakewoodworking.com/post...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Dining Room Set #15: He's Got Legs...

02-05-2010 03:50 AM by CaptainSkully | 12 comments »

Today, I bit the bullet and tried out my 45 degree lock-miter bit to make the four-sided quarter-sawn white oak 4” x 4” legs. I outsmarted myself by trimming the edges at 45 degrees. Unbeknownst to me, the router bit needs all the meat it can grab to make the “tongues”. As a result, I have very little “lock” in my lock-miter. I have just enough to register the corner, but I’ve lost about half of my glue surface. Sigh… The good news is that...

Read this entry »


View scottb's profile

Thorsen Table contest #5: quirks and veneer

05-17-2007 03:36 AM by scottb | 9 comments »

Had a few unexpected hours to myself this afternoon – turned that into some useful shop time – and got one step closer to having that old door look a little more like a table! I put the big glueup block o’ leg onto the tablesaw and attempted to cut them down nice and square – with as thin a veneer left as possible. The seperating was easy, the fine tuning also went better than expected, just a slow and careful process. I should have made 5 legs, as I messed u...

Read this entry »


View pintodeluxe's profile

Twin Tenon Arts and Crafts Dining Table #6: Finishing Touches

09-11-2012 04:49 PM by pintodeluxe | 9 comments »

Top finished Frame assembled Four-inch long T30 lags secure the top timbers. Laminated or not? By laying out my jointlines carefully, I was able to laminate some 8/4 and 5/4 together. The glueline is at the angle of the timber, so it is not visible. In addition, I laminated some thin veneers on both sides. Back to the project page… http://lumberjocks.com/projects/71281

Read this entry »


View CaptainSkully's profile

Limbert Lamp Table - Stickley #240 #7: Fumearama

09-08-2009 09:11 PM by CaptainSkully | 9 comments »

After letting the glue cure overnight, I took it out of the clamps and gave it a final hand sanding. Not too bad, but could be better. I think next time I’ll err on making the legs touch on the outside corners instead of a flat meeting. This caused some gappage that I filled with putty. Since our dog laid down by the tent, I figured it was time to fume. There’s no better time than the present. I carefully put the tent over the table and then propped them both up en...

Read this entry »


View pintodeluxe's profile

Arts and Crafts Entertainment Center / Sideboard #1: Side Panels

02-26-2013 08:38 PM by pintodeluxe | 9 comments »

Here is the next project, an entertainment center that is reminiscent of a Stickley sideboard. The central slat detail gives a nod to Kevin Rodel. The backsplash features my “wedge and strap” detail, also found on my A&C dressers. ----- Leg blanks are laminated from 3/4” stock. Next I add 1/4” thick veneers on two sides. Even though the finished veneers will only be 3/32” thick, I leave them 1/4” thick for now. I find that 1/4” stri...

Read this entry »


View kordwood's profile

finally getting close to the finishing room ...

04-01-2009 05:33 AM by kordwood | 9 comments »

I’ve been working on a big Stickley designed double bookcase for way too long, but I’m closing in on it now. Finally put the tongue-and-groove back boards on, all the shelves are done (middle shelves are fixed, top and bottom shelves adjustable … it was too tall for me to get a full top to bottom shot, so you can’t see all the shelves in this pic), it’s all glued up and ready for some final sanding. It’s coming out fairly well, if I do say so myself.But it&...

Read this entry »


View pintodeluxe's profile

Arts and Crafts 6 Drawer Dresser #11: Waxing Dressers and adding Drawer Pulls

02-04-2013 05:30 PM by pintodeluxe | 8 comments »

I waxed the dressers with Howards Walnut wax and #0000 steel wool. I tested the difference between sanding with a 1500 grit sanding sponge, and waxing with steel wool – and I prefered the latter. I waxed with the grain, and let the wax dry. Then I buffed it off with a clean lint-free rag. ----- For drawer pull layout I used Scott Collins no-math layout method. My drawer pulls have 2 bolts, 3” on center. -----I made a full-height jig to drill the holes for the machine bo...

Read this entry »


1 2 3 4 5 next »
42 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase