Here are the winners of the Christmas Box Build Off. If you would like to see all the entries please visit Christmas Box Build Off Contest
I have an end grain cutting board made of purple heart and yellow heart. The blocks are squares, 1-1/8” square, about 1-1/2” long/thick, glued up with mixed patterns (making letters). The board was treated with mineral oil. It appears that the yellow heart pieces have swollen from absorbing the mineral oil, and have busting some of the glue joints. Has anyone ever experienced this type of problem? Thanks for reading and your comments. Kevin
A few of the projects I’m working on currently… or as soon as it warms up enough for me to get back in my little shop.
Not a threat. A lyric from an early Pink Floyd album. But I am going to do it, to the blanks. There’s some trig. in this part of the blog. If you don’t know Trigonometry youll just have to trust me. First this is what came out of the glue-up. Now I’d pre thicknessed both the Sycamore and the purpleheart on the side which will be triangle shaped before gluing up so all I have to do now is thickness the other side, to 4mm. I do this by trimming the end off in the table ...
This shadow casting lamp creates a cool effect to any room by casting a shadow on a wall of any scene you’d like to create in the lamps silhouette panels. For this project I used horses. The front of the lamp shows a horse in a natural calm state on all 4’s . And the frosted front panel of glass gives a nice subtle tone of light to illuminate the room. The back of the lamp has a silhouette of a horse raring on it’s hind legs. This is the side that casts a shadow on...
As we were taking in some rays in the Palm Springs area last month, I had the urge to see some lumber or tools, and realized it was not a long drive to Carlsbad California to the Tropical Exotic Hardwoods supplier. Their website is here It was relatively easy to find with GPS, and the warehouse was large and well lit. There were a few customers while we were there (about an hour), but it was not really busy – it was a week day around lunch time. They had ...
In my last video I showed you all the renovation of the old shop space, during that renovation, I made some recess cavities in one wall of the shop. In this video I walk you through the steps of making the recess shelf unit to go into those cavities. These recess shelves are not just for the shop, they can be used in the home as well! Add some glass shelves and you have a nice knick-knack display shelf, or use them around the home for any organizing needs.
Today I sanded, I sliced, I diced and I shaped. I was not at home to Mr. Cockup. Today I’m fierce and to the strains of ‘Fearless’ off, Pink Floyd’s Meddle off I went. All this took just two hours.. First I sanded all the slices to 6.93mm then I glued them together (superglue, most precise and quickest) Then I shaped the triagle ends on the disc sander The I fulfilled my promise of yesterday and chopped them into little pieces Back to the...
This is an earlier project of mine that also neatly shows one of the simpler box making techniques I use, that of the mitred box with drop-on lid. First we see the basic components: On the left are the four sides, each with a 3mm slot routed in near the bottom to hold the base. The base is bottom right and is two layers of 1.5mm birch aeroply. The top is the last piece, top right. This particular one is a three layer sandwich; 3mm design, 3mm ply and 3mm maple (this bottom 3mm will loc...
I have been grabbing an hour here and there letting things like the grass slide (I am going to do it when I finish this post). I have 6 boxes well on there way, pieces cut for another 9, and that takes care of most of Christmas. Here are a few pics of my progress so far. I have used a lot of different woods and think that most are listed in early post in this thread. I hope to be able to post some of them completely finished soon. As with all things, time will tell. !https://s3.am...
- My Journey As A Scroll Saw Pattern Designer - 1187 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1209 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- scottb - 144 entries