How to Make Custom Waterslide Decals This Waterlide Decal Tutorial is available as a PDF download on my website Materials List • Clear or White 8.5×11 waterslide paper• Deft Gloss Clear Lacquer• Brayer Roller• Paper Towels• Bowl with clean water SOURCES FOR DECAL PAPER WATERSLIDE PAPER • MicroMark• BelDecal 1. Make decal design on your favorite graphic application.I use a Mac based system so I will share the details of how I do things, however, you can do this on any co...
On July 3rd I threw together a chair to bring to the 4th party the following day. I decided to use up some scrap 2×4s. I had no plan, no chair experience, and about 5 hours time in which to make it, so I just sort of winged-it, inventing as I went. Here’s the test-fit of the cut pieces for which I used my miter saw and band saw. It looked somewhat chair-like, at least. I used countersunk deck screws and glue. I banged pieces around in the clamps to get everything exac...
Hi All, Just though I would post some pics of a bandsaw mill my dad and I built out of scrap parts from the junkyard and a few yardsale tires. There was a lot of trial and error and disigning ideas until we settled on this one and it is always a work in progress, but I think we are close as we are getting great results. The motor is a HF 12 or 13 horse (the biggest expendature) and we also use their trailer winch for raising and lowering as well as pullies. The mill...
There are a few corrections on the first page and can be seen here. This information is from an actual build of a corian countertop. This was a job for united technologies 6 restrooms with three undermount sinks each. Photos were taken along the way. I will be as clear as possible on all the steps needed to accomplish this. We are lucky enough to have a CNC for the cutouts. Laying them out on cad is extremely cost effective. If you dont have on you can use a mock-up piece you cut from p...
so After setting on the last design (see previous post in this series) I went out to disassemble the bowling alley laminated top – the purpose was to remove all the nails, so that I can drill the dog holes, and also laminate it in a double stack to give me a 4” top on the perimeter (5” in from the edges – for clamping purposes, and leg attachments). This idea turned to be disastrous. The nails are hardened steel, and twisted making the job of pulling them outridicul...
This blog entry today is somewhat woodworking related, and the content has mostly been provided by my daughter Rachel, a student of woodworking, at least in the way I do woodworking. She’s been hanging out in the shop all afternoon since the grade school decided to call off school today because the Cottonwood River was up so high, cutting off roads around the County today. I’m enjoying her presence in the shop, but I hope the water is down tomorrow so she can learn something w...
Hi guys- I promised I would post pictures of my latest project- a 1950s era Craftsman Table Saw… Sorry for the bad pic quality- these were taken with my cell phone. I’ll have better pictures taken when it is fully assembled and in working order…All torn apart- whoever stored it was smart and poured motor oil over the whole thingThe base alone weighs about 25 poundsHalfway assembled and all polished upTable top after 3 coats of Butchers Paste WaxMade a plate insert out of Ash...
I had posted the following in the first part of the ‘blog’ (comment section) and someone was kind enough to suggest that it might be easier to find posted as a new segment/addition. Now that I have been educated, I will post the upcoming tools discussion as Part 3 and the step-by-step as future segments. A little bit about wood selection: For NON-functional spoons the choice in wood is completely open, although there ARE considerations. If you plan to carve in great deta...
This is actually the second in the series but I didn’t understand how the blog system works. The first in the series is a separate blog entitled TV stand. I will eventually put this on my website in more detail but here’s a shorter version of some of the problems and success of making my TV stand. I wish I had some plans or I had more knowledge about building furniture. Because I don’t the project just isn’t moving along very fast. What started me on this project was ...
There’s an article, by the well-known Christopher Schwarz, that tells how to make a workbench for about $175.00. I like that idea ;-) He raves about SYP, but … not much of that in my neighborhood, so …. I went with the dimensional Doug Fir, from the Depot. I’m working on the base, right now, but … here’s the top … before being trimmed to length: Got his recommended vise, bench dogs, and Wonder Dog, from Lee Valley. The top will dress ...
- My Journey As A Scroll Saw Pattern Designer - 1199 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 67 parts
- As The Lathe Turns - 67 parts
- Sheila Landry (scrollgirl) - 1221 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 333 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 209 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 146 entries