LumberJocks

Woodworking blog entries tagged with 'primer'

  • Advertise with us
View RaggedKerf's profile

Lego Table #7: Good progress

11-22-2015 07:58 PM by RaggedKerf | 0 comments »

This post contains a lot of images—I’ve posted some here, but for the rest, please visit my woodworking blog) Very productive nap time session today! First order of business was to take advantage of the 65 degree weather and paint the play surface for the top. We chose a primary blue to cover the MDF. The kids have plenty of the green Lego baseplate’s, so blue should compliment what they already have. The MDF took the paint in three thin coats that ate the entire can. Th...

Read this entry »


View RaggedKerf's profile

Lego Table #6: Hybrid woodworking

11-22-2015 07:53 PM by RaggedKerf | 0 comments »

This post is fairly image heavy—I’ll post a few here but to see all the images, please visit my woodworking blog) Accomplished a fair amount today. Before I got to work, I dusted off the base and the legs one final time and then primed the legs …and painted the base. It’s hard to tell, because I used white primer and white paint, but trust me, it looks nice in person. I put on two thin coats and used up almost a whole can of spray paint, but it sure does look ...

Read this entry »


View RaggedKerf's profile

Lego Table #5: Prepping for paint...

11-22-2015 07:46 PM by RaggedKerf | 0 comments »

Today I cut up the main play area surface (MDF). I knew I wanted to prime the base, so figured I’d cut the MDF first and get the fine dust mostly out of the air before priming. I had to use the same layout methods (and again told myself I need a table saw) and spent precious time marking and clamping before making a few cuts, but in the end, got a perfectly cut plank of MDF that will fill almost all the space inside the upper box. On the left and right, I also cut out 4” wide “wings” that ...

Read this entry »


View DustyMark's profile

Building a KARA Hummer Layout Duck Boat #15: Painting the Boat

06-25-2015 05:38 PM by DustyMark | 2 comments »

Overview Construction is complete and I moved the boat to the garage in preparation for painting. Oil-based paints put off some nasty fumes, so the garage was the safest location. I painted the bottom with some extra paint I had left from some annual kayak repairs/maintenance. I painted the top with primer and flat duck boat paint. Bottom Paint The ducks don’t see the bottom, so I used Interlux Brightsides paint (Sea Green) to provide a smoother coat against the water. I ha...

Read this entry »


View RaggedKerf's profile

Castle Bookcase #14: Prepping for Paint

08-16-2013 10:57 PM by RaggedKerf | 0 comments »

I wrapped up the final bits necessary before painting in the past few days. Here’s the rundown on what I’ve been up to… First, I sanded everything. This took a whole day’s session…there’s a lot of surface area on this beastie. When satisfied the kids won’t get any splinters and everything was nice and smooth, I worked on the draw bridge. I used the router table to rout vertical grooves to simulate planks. Like so: Oops, the picture is...

Read this entry »


View GlennsGrandson's profile

From Rust to Lust, can I bring it back? #3: Got a little faint from the paint...

04-15-2012 02:22 AM by GlennsGrandson | 4 comments »

So I stripped it last night, and a little more tonight until it was R rated. Primed some parts and put some Rust-Oleum paint on it. Got all the cast iron top parts waiting on the saw horses for me tomorrow (they will haunt me with all of their curves to clean). Figured out I could get the metal tags off the pieces with a little work so I didn’t have to tape them all off. I just have a sticker left on it that I dare not remove that is a list of patents that I think is pretty cool so I...

Read this entry »


View Dan'um Style's profile

100 pounds of clay - ..... Fired ........ 6 panel metal coating ........................PHOTO BLOG

11-16-2007 06:21 AM by Dan'um Style | 11 comments »

Fired the load yesterday. 14 hour kiln cycle …. cone 1 … around 2000 degrees Unloaded this evening. NO TILE BREAKAGE …. first time EVER !! NO Cracks or anything !! Think the p-clay is the clay for me to use ........... Photo my first complete 6 panel set !!! Never in over 8 trys have I been able to get all 6 to survive. Even when firing mutliple sets one would always break. photo of the metal coatings material photo of primered tiles ...

Read this entry »


View Lee A. Jesberger's profile

Veneering #1: A Primer Course

07-12-2007 06:35 AM by Lee A. Jesberger | 19 comments »

Veneering, a Primer Course The top photo is a couple sample packs of sequenced matched veneers from Woodcraft supply.The secong photo is bookmatched Camphor veneer.The third photo is Bruce holding a sample of Avodire Crotch veneer, with No Finish on it. Some of you may have noticed my slight addiction to working with veneers. When you start to investigate the available veneers on the market, it becomes very difficult for me to understand the resistance to it that some people have....

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com