Ever wondered how to become published? How to see your unique creation on the pages of your favorite woodworking magazine? Well, now is your chance to achieve just that! We’ve partnered with Popular Woodworking magazine again to present a new, exciting challenge for all members of LumberJocks.com. (If you’re not a member, now is the time to join us!) This time it’s all about the bookcases. Everyone needs them. Are you ready to design a bookcase that catches the eyes of Popu...
With the publication of my article entitled “It’s a Secret” (click here to read the article online) in the November issue of Popular Woodworking, I started getting lots of email with comments and questions about the subject. Evidently so did the magazine because they started forwarding the emails to me. All had a common theme…”we want more!”. Well, last week I started a series of posts on my blog that will add to the article. This series is going to be o...
Crazy Stuff Stumpy Thinks About #18: The WoodWright's Shop & The Highland Woodworker... I dunno about this...
As an owner of three strands of Roy Underhill’s mustache hair, which I bought off eBay and keep in a frame above my bed, you can imagine how excited I was to hear that Popular Woodworking has signed a deal to offer the original early years of The Woodwright’s Shop on DVD. Actually, more than just excited, I peed myself a little. I love his show. To me it takes everything great about woodworking, and all that is good and pure about television, and wraps it up into one saw-dusty pac...
I thought I’d let my woodworking buddies know that my DVD was published! In my above video I share a preview of the DVD that I just produced & released with Popular Woodworking Magazine, titled: “Building a Traditional 18th Century Jointer Plane with Bill Anderson. It’s nearly 4 hours of instruction! Bill and I wanted to create a very affordable and detailed class that would be easily understood by both beginner and advanced woodworkers, and we achieved that…with the help of R...
We’re at it again – it’s Challenge time!! And we’re raising the bar again ;) I know – you are so excited and want to know the details. You will have to wait until next week to read all about it but I can give you a sneak peek into what is going to be happening! Remember our Thorsen Table and Virtual Dining Table Challenges from last year? Well, we partnered with Popular Woodworking magazine again to bring your the best challenge ever. This time it’...
LumberJocks raised the bar again with over 50 entries in our Bookcase Challenge. You proved that it’s possible to be very creative even with such a common project and you made the judging process extremely tough for the editors of the Popular Woodworking. Here’s the summary of the event as well as the announcement of the winner and runner-ups by Glen Huey, Senior Editor of PW: “Congratulations everyone. The LumberJocks excelled at designing great looking, buildable...
Right Click to DownloadRight Click to Download in HDSubscription Options After taking a couple days to catch up on stuff, I am finally ready to share my Woodworking in America experience with you. This was my first WIA and my expectations were building all year long. I even vowed to skip IWF (the big tool show in Atlanta), just to make sure I could focus all my attention on this education-focused conference. And am I ever glad I did! The MarketplaceThe show consists of two main areas: ...
A special treat for those of us unable to attend the 2008 Woodworking in America Conference sponsored by Popular Woodworking and Woodworking Magazine. This quick video is live from Neil Lamens of Funitology Productions fame on the first evening of the conference. During the conference check in Neil ran into Mark Vanderlist from Matt's Basement Workshop. Sounds like a great conference!
Intrigue, controversy & camaraderie from The Woodworking in America 2008 Conference This is the 4th and last part from our interview with Neil Lamens of Funitology Productions fame on his last day at The Woodworking in America Conference 2008. In this brief installment, Neil piques our interest with some intrigue at a Woodnet forum dinner during the conference. He also shares a fun story rooted in the controversy of tails first or pins first. Last but not least, Neil got a chance to...
Here are the frequently asked questions answered by Glen Huey, Senior Editor of Popular Woodworking. Can we enter an original design that we’ve recently executed and already built?Yes, as long you’re willing to build the unit again or work with us as we build it to your winning plan. How detailed does initial design need to be? A set of plans, or just a rough sketch?This is, to a large extent, up to the you. We must to be able to determine from the drawings that the design is able...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries