Exciting Progress.. I am making some great progress on my closet project. I currently have the copper rods in a machine shop where the parts are being fabricated. The clients and I had talked about changing the lights to better illuminate the fine work that I have produced. While the metal work is being done I decided to go ahead and install the new lights. WOW! Man-OH-Man! Does it ever look fantastic! Here is the closet with the old lights: Here is the closet with the n...
Finished! Well it’s been a long journey and it did not end without one extra push. I finished installing the copper handles Monday by 11:30. There was a couple of scratches but I was certain I could buff them out. This is a skill that goes with the territory. I worked on the finish for the next six hours and I could not get the finish to blend. How to Remove a Scratch- After exhausting all other options this is what I resorted to today: Yes you are seeing it correctly...
Another Milestone I am pretty excited to share with you guys today’s progress. I got all of the handle pieces finished! Next I have some touch up on the doors and the final install. I am sure I will have a full day of technical sweating. I had to brush the pieces again on the wire wheel to brighten the finish. I then hung them from the ceiling and wiped them down thoroughly with acetone. This strips any oil from the surface. I sprayed them with an acrylic resin lacquer by Sh...
Success- I installed the big door today with a helping hand. The careful planning paid big dividends in an incredibly smooth and accurate install. Before doing the veneer work, I installed and fitted the doors. The doors were then taken to the shop and finished. The hinges were numbered and went back into the same locations. This meant that the final install required no additional adjustment. This is what I call jobsite theory, and it worked out this time. Getting a handle on it&...
Another Step Closer… Tonight, I sprayed the final coat of lacquer and painted the groove in the door black. Tomorrow I will hang the door first thing in the morning. The overnight dry time will allow the finish to cure sufficiently so that it may be handled with a hard finish. I installed the small door a few days ago and it went smoothly. The small door only weighs 48 lbs. The big one is 108 lbs. and keep in mind it is a hollow core door. Want More? Go to this li...
- My Journey As A Scroll Saw Pattern Designer - 1581 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1606 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 185 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries