Well get this done, despite my best efforts. The design I posted works well. I did make a couple of changes though. It is deeper than originally planed. The other is on the back inside bottom I used my pocket hole jig to make a couple of 1”x1” runners for the plywood to screw into. I also used the same thing up front to create a lip. It is working as planned, I have freed up an entire shelf on my Rack that is on my wall.
Matthew and I were going to do a video this weekend but got side tracked with the need for storage. Things are piling up and disorder is setting in. Time to get things in order a little. Last week I added a drawing for shop cabinets to the free plans section on www.thenewfoundlandwoodworker.com . They are very basic, and cheap. This is them :)Mind the doors, they are stuck on with double faced tape for now. Hinges Monday Cabinet Size14 1/4×33 1/4 Materials1 sheet 5/8 D grade pl...
I went into the shop today to finish up a blanket chest. I ended up making a step stool….Here are some pictures and a video.
I’ve got my own site where I like to write about my projects so rather than duplicate them here I’ll just provide a little teaser. If you’d like to read the full post just click here. As promised, I completed the base of the entertainment center this time, along with a couple of other little details. The base is just made up of four corner blocks and four rails screwed together with some pocket screws. The corner blocks were actually pretty easy to make although…
My wife wanted a daybed that we could put in one of our spare bedrooms for when we have more than one couple stay the night. We searched high and low, but couldn’t find anything that we liked. So, I downloaded Google SketchUp and started playing around. My wife and I both like the arts and crafts and shaker styles, so that’s more or less what I based it on. It’s not true to form, since I had a tight deadline on getting it done, so no mortise and tenon joints. I ...
Step by step build of this blanket chest. (edit: I hit the easy button, no cutout on the base) Feedback is welcomed!
After a couple of days of mowing grass, moving all the plants out of the greenhouse/paint booth and cleaning up things I managed to get back in the shop and do some work today. After all the clean up I took the assembled frame and moved it to the cleaned out section that I have up front in the shop. I originally enclosed a 10×10 section with heavy plastic so LOML can bring her plants in to winter over. I then proceeded to cut the outer Cabinet Verticals, Headboard and Header Board ...
I found some great ideas for building storage beds for our two boys on the internet, at Ana White Homemaker. After studying these plans for a bit, I decided I wanted to make some changes, mainly to upgrade the joinery methods and make the base cabinets deeper, so they met in the middle under the box spring. So, here’s what I came up with after learning google sketchup, and going through a few design revisions. This bed is basically made up of several box cabinets that will be bolted ...
So after making a large workshop upper cabinet, and then a glass door cabinet, I decided to start making more cabinets to store garden tools in the garage. While I’m at it, I decided to make two, one for long handled tools, and another with shelves for smaller stuff. I made the previous cabinets with maple, and it seems like a waste of money to make a garden tool cabinet out of relatively expensive wood, but hey, if I’m going to all the trouble, it might as well look good. I al...
Hello lumberjocks. I’m in the process of getting more organized with the use of a French cleat system in my shop. My latest addition is a finishing supply rack. It holds 32 cans of spray paint, 15 quart size cans, and some more finishing supplies. The benefit is that you can always see what you have at first glance. For those who are interested here is the video: https://www.youtube.com/watch?v=xXc5jk2Do1s
- My Journey As A Creative Designer - Woodworking and Beyond - 1806 parts
- Extremely Average - 324 parts
- Toy costruction - 126 parts
- A journey into the workshop. - 111 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 90 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1831 entries
- dbhost - 438 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 318 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 245 entries
- Dave Rutan - 245 entries
- Betsy - 228 entries
- stefang - 221 entries
- A Slice of Wood Workshop - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- bandit571 - 201 entries