I chose the types of wood I’m going to use to build the AmbersBear inlay I’m putting on the Festival of Trees wreath hanger. This slice of burled maple I found will make an awesome hanger and provide the perfect place to highlight an AmbersBear inlay. I’ve already built the Yellow Heart / Bacote and the glitter filled Purple Heart ornaments for the wreath so I laid them out with the hanger to see what it all looked like. Placing all the various colors together helps...
Earlier this summer I started to experiment with using a glitter filled epoxy as a substitute inlay material when making Christmas OrnamentEZ for EZ-Wreath. This entry talks about the process I went through to make these ornaments. Because I’m a fan of Purple Heart (PH), I just love the deep rich violet color the wood turns after a little exposure to light, I chose it for my base material. Well that and I had more PH sitting around than any other wood… Still not a bad choice....
Raised Panel DoorsBuilding a set of raised panel doors might seem like a daunting process. However, it’s simply a sequence of steps that, granted, use most of the tools in a serious hobbyist’s wood shop. Wood movement is an issue here since the panel grain runs perpendicular to the grain of the top and bottom rails of the door frame. Watch this video to see how to build a raised panel door in one 25-minute video. This blog entry also includes links to eight individual videos that highligh...
Multiple Mortise and Tenon Joints I’ve owned a Leigh dovetail jig since the early 90’s. I started with the 12” model that I used for drawer construction. I switched to the 24” model so that I could join the top of a case to the sides with a through dovetail joint. I bought the M2 multiple mortise and tenon attachment for the 24” D3 jig prior to building a book case that was to hold a tremendous amount of books. I wanted more glue surface and strength than a rabbet joint could pro...
Ok I’ve been really wanting some sort of router lift for a while now, my Freud FT2200VCE is REALLY slow to adjust under the table, the Router Raizer get mixed reviews and the Unilift seem to be running in the $700 range + long wait time to get one (and I would buy a lathe if I had that much lying around). Seems like most of the DIY router lifts are for fixed base routers or pretty much require you to permanently install your plunge router under the table. As it’s my only router th...
We’re going to use a Dremel router to make a sign with recessed lettering. I suggest barnwood because of the contrast between the weathered surface texture and ‘fresh cut’ letters. I also have enhanced the letters by burning (pyrography) the edges of the letters for increased readability. Of course you can scale up to larger routers if you chose. Stock: Barnwood 2”x10”x24” Suggested material and dimensions Safety: Goggles, F...
Introducing Template Tom the name I was given by my students when giving lessons on the use of the router at the Association for the Blind woodworking group. I was asked to look after for a year after I had been doing some volunteer work for three years previous. The best Class I have ever taught. Average age of the group was 36-82 years of age. A little back ground to consider as it helps to know ‘Who is making such a post’ I began an apprenticeship in Carpentry and Joinery wa...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries