I started a document on one of my computers for notes I keep on plane information. My issue is I have several work laptops, a few personal laptops and travel a lot so keeping the notes in one place is a challenge. I figured this way, I could get to them from anywhere, including my windows 7 phone when looking at buying a plane, and maybe others would find the information useful as well. I’ll try to break up the information into logical units as separate blogs in this series. As alway...
So in the spirit of getting everyone in the shop and cutting up some wood I decided to post up a measured drawing of a 3/4” wooden rabbet plane in the 18th century style. It is all wood with the exception of the blade which is easily gotten from Lie-Nielsen here. It features a conical escapement and some simple embellishments that a hand plane, chisel, and #7 sweep gouge can handle. The plans are basic with a few things that can be easily changed if you like. Such as the bed angle...
Let me start by saying that the first part of this blog although posted earlier today, was actually made about a year ago, I just posted it today as a preceding part to the one you’re reading now… tried not to double post and ‘push’ other’s from the blog front page, so I waited half a day between 2 posts, although both were made ready at the same time. to continue the story were I left off, what I found most difficult with setting up the box was the box joints...
Judging by the damage that appears on old wooden planes, patience soon runs out when we handle things that are not operated by a switch! Sometimes this damage is terminal but often with a little care and lots of determination the wooden plane will work again. This video shows the basics of how to handle moulding planes. There is a lot more to investigate and much of that is to do with sharpening, especially when the moulding plane is complex. It’s hard to know how much interest ...
Have you ever gotten the feeling that if only you’d known more at the start of something, you’d have saved yourself a whole lot of time, effort, and money? Maybe it’s just the learning process, but there are a few things I wish I’d known ahead of time before I began buying hand tools for woodworking. In my attempt to document my own progress with the craft, hopefully I’ll provide a little insight into how I managed to assemble a working set of tools. Admittedl...
I was out in my garage the other day and went to start a project. Reaching into my toolbox and retrieving a hand plane the first thing I noticed was that it was rusting. Agian! I had just cleaned the rust off of all my planes a little over a month ago and already they were showing signs of new rust. There is nothing more frustrating than spending my free time cleaning rust off of my tools over and over again. I need to find a better way to protect my tools. I already keep them stored in a ...
Just playing around in the shop and came accross these planes. I made them a couple years ago, and really enjoyed it. Nothing too fancy, and the basic plans came from a book on making hand planes. They are a pleasure to use as the shavings come peeling through the throat opening. That nice whoosh sound that only planes make, and shavings thin enough to read through! And a polished surface that’s left behind. So much satisfaction in using them, knowing you made them. ...
Thanks to the likes of WayneC, Thos. Angle and Bob #2, I’ve been accumulating hand tools. One of the latest additions to the shop is a beautiful wooden plane. Made from Indonesian ebony and brass, it has an adjustable high-speed steel (Rc62-64) blade. I bought this plane for three reasons: 1. It was cool to look at.2. It didn’t cost much3. I thought my son could play with it and it could be his. Now, being a son of the metric system, I knew this plane was small. I just...
Here are some more of my garage sale finds. I still don’t have quite all of them done, but I’m close.I intended to wait to restore these, but I couldn’t resist. For some strange reason my wife thinks I shoud be working on repairs on our house. I bet if I took a vote here, most of you would back me up. Thanks for looking.
I am always on the lookout for tools that I need (and always looking for tools I don’t need). But we all know that everything is so damn expensive these days. I have 4 kids so I can’t afford to run out and buy all my tools new. I try and hit yard sales, garage sales and salvage stores when I can. Most of the tools guys like us use are outdated junk to everyone else. The average homeowner owns a compound miter saw nowadays and wouldn’t know which end of a hand saw cuts the wo...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries