A few people have had some questions about the ways I have done some of the refurbishing and purchasing of old traditional wooden planes.Here is a short video on some of the things I have learned through the years.These are my methods and opinions in refurbishing ole planes.
I took my lumber for the top to Rick’s at The Woodworking Source to mill it up. What is taking my better part of 2 days we knocked out in about an hour and a half. These are some pics of Rick’s place. Its interesting that Rick does not do woodworking outside of work. He golfs because it is what he does to forget about what he does when he needs to forget about what he does. He is a professional and a great asset. ———————...
Recently, there was a bit of concern expressed regarding a board that was posted as a project. it got me to thinking (a rare occurrence) that some folks might not understand or appreciate the dedication, skill and work that is involved in the making of a board. Hence this blog/tutorial. First, lets define the term for those not familiar with boards. Most authorities agree that a board is a flat slab of wood or other material for some specific purpose. For our purposes, we’ll limit th...
Well it’s a red letter day here in Nebraska. My Sargent 410 showed up in the mail, and it’s rusty, finished is cracked, but it’s functional and will be ready for it’s bath soon. But this blog is about to be hijacked by an event of more personal significance, albeit a galootish event as well. Long story short, I have done a little side work on some photos for Thomas Angle, who is working up a web page for Owyhee Design, the woodworking arm of his two businesses (The ...
THE ART OF NOT TAKING A TRIP TO THE EMERGENCY ROOM!Yesterday I awoke out of my daze of admiring a quilted maple block with a shocking sensation and blood everywhere. The dull blade on my bandsaw did not help and using my hands to push the beautiful block through didn’t help either. Simple word of advise which many of you can attest too. Keep your tools sharp and use a push stick! Lets say it all together now! Keep your tools sharp and use a push stick!Keep your tools sharp and ...
If you have ever had material that is too large for your machines, fear not. In this video I demonstrate how I use a set of planes to achieve a time honored technique by flattening, thicknessing, and joining a live-edge, cherry table top. I hope you enjoy and please feel free to give me feedback so that I may improve in both my woodworking and video abilities.
There’s been more progress in the last several days than in the several months previous, so here goes another installment… When we spoke last, the Venerable Wall Hung Hung Tool Cabinet was where it has been for nearly ten months: on it’s back, on top of my assembly bench. The tambour has been fitted, and the sliding plane till door is in working order, albeit bounded by f-clamps and a certain, left-most stile. Oh, the stile. Here it is, and without any detail (sorr...
Time to get this blog active again. I had been overrun with work for a long time and not doing much of anything in the shop for quite a while. That is not a good pattern for one’s work-life balance. In Feburary, I fell while on a business trip and this has temporarily left me without the use of my right leg. I have had lots of time to reflect and to renew my commitment to getting working in the shop again. Although, it is probably going to be another month or more before I am able...
This week Charles Neil visits the Stumpy Nubs Workshop to help make me smarter; with the help of Bill Pentz we begin our three episode dust collection series with a big ol’ wooden cyclone; and I talk hand plane physics with the Japanese. Plus a review of the Wixey digital angle gauge, tips on doing segmented glue-ups, and why my abs don’t look like Tommy Mac’s… that and a whole lot of fun on this episode of Blue Collar Woodworking! After you watch this one, visit St...
so just like every other woodworker at one point (what’s up with the other every other woodworkers is beyond me…) I was researching and learning about ways to sharpen my chisels, planes, and other blade tools in the shop. Since I am the weekend warrior at this point, and I do not need to resharpen my tools THAT often, nor THAT much, I figure that I can do without any expensive powertools (there are several of those on the market) to sharpen blades and I dont really have the spa...
- My Journey As A Scroll Saw Pattern Designer - 1448 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1472 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 234 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 197 entries
- shipwright - 194 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- stefang - 183 entries
- BritBoxmaker - 169 entries
- PurpLev - 163 entries