Woodworking blog entries tagged with 'plane'

  • Advertise with us
View Dave's profile

refurbishing old tools #20: Traditional Moulding Plane

07-23-2012 01:21 AM by Dave | 40 comments »

Here is a video on a plane refurbish from out of the box to use. The plane was bought online and a pleasant surprise when I got it. I have also posted this on my blog. It goes a bit more in Enjoy.

Read this entry »

View Maveric777's profile

Uncharted Territory... My First Inlay & How I Did It

12-03-2010 03:47 PM by Maveric777 | 39 comments »

Well, I been hanging around here at Lumber Jocks for going on a year now. I have learned so much from so many, and can honestly say I owe a lot of what I know today to the sharing of knowledge here. So after attempting my latest “Exploration” into the wild world of woodworking I figured this would be a good a time as any for me to pass along a little blog on how I did my “Dreaded Inlays” ..... Long story short, I was hit up by a coworker asking me if I could build h...

Read this entry »

View Dave's profile

what i've been doing #17: Journey with me and Krenov.

01-30-2012 07:40 AM by Dave | 39 comments »

I am a type of guy that will get a notion to do something and just go with it. I found a plan online of a Krenov plane using Hock irons. I don’t have a hock Iron, I do have an old two inch smoother iron from Providence Tool Co. So I choose to modify the plans a bit to see if I could get the thing to work. I know the Krenov style is one of the easiest to build.This will be a two part series and I am at the glueup. First the materials. The base of the plane is good old Mississippi swee...

Read this entry »

View scamp238's profile

Stanley-Bailey #4 Restore

11-19-2012 09:07 PM by scamp238 | 38 comments »

I bought a Stanley-Bailey #4 plane today. This is my first plane and I want to restore it the right way. I am on a limited budget, so it may take a while. I want to use the parts that were there when I bought it. I know very little about planes, so I am asking for some help/suggestions from all the great LJs out there. Let me post a few pictures so you can get an idea of what I have to work with. I hope there is someone out there that can help me.

Read this entry »

View OregonBurls's profile

How to find and harvest legal burls!

10-13-2009 05:44 PM by OregonBurls | 38 comments »

Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....

Read this entry »

View Mauricio's profile

My Sharpening Process

03-19-2013 07:32 PM by Mauricio | 37 comments »

Bigredknothead did a blog on his sharpening process recently and I thought it was a good idea; I enjoyed reading it and wish more people would do the same. So I’m following suit and hope that others will weigh in with their own no nonsense techniques. This is what I’ve settled on, at least for the time being. I like it because it’s a pretty easy and inexpensive process. Maybe it helps bring some sanity to someone else who is trying to decid...

Read this entry »

View Dennisgrosen's profile

toolgloat #5: with a little luck....with a little luck.....

02-22-2011 12:12 AM by Dennisgrosen | 37 comments »

... with a little luck….with a little luck…..and some help from my sister, handtools ..... I have over the year always talked about how great and fantastic possibillity it is for you to have acces to fleamarkets and other places where it is possible to buy good used beautyfull handtoolsmore or less rusty but with a little albowe grease and knowledge is going to bee great users again I have envy you alot when I have seen your toolgloats witch has cost mee many green bulbs and...

Read this entry »

View WayneC's profile

Handplane Reference #4: Web Resources

04-08-2007 04:34 AM by WayneC | 36 comments »

This is a list of links that I will maintain that are related to handplanes. This is primarily intended for my own use, but feel free to add to the list if you have some favorites. Manufactures Anderson Planes – Handmade Infill style planes Brese Plane – Handmade planes by Ron Brese. Also has blades for making planes. Classic planes – Infill plane manufacture Galoot Tools – High Quality Handcrafted Plane Blades and Chisels. Holtey – Infill...

Read this entry »

View PurpLev's profile

Bowling Alley Workbench #6: There is more than 1 way to skin a cat - not so with bowling alley floors though - finally success

07-08-2009 06:19 AM by PurpLev | 36 comments »

Yes. Finally some light at the end of the tunnel, reverse thinking, and this project seems a bit more doable, and even not much trouble at all. Originally I tried to get the (2.5” hardened) nails out by using a cat’s paw and a hammer to pull each nail out of the 2.5 laminated hard-rock maple strips. I figured once I get all the nails out of the top strip, it’ll just free it from the lamination, and be nails free… one strip at a time, until I have them all cleared ou...

Read this entry »

View Mauricio's profile

Workbench Build - Splayed leg French Bench #12: The Deadman

09-04-2012 04:06 AM by Mauricio | 35 comments »

Hello LJ Buddies, Here is my most recent progress. I’ll let the pictures do most of the talking. I previously milled the grove on the underside of the bench. I cut a rabet 3/4” in from the front and glued on a 3/4” tenon. This was cut by hand. First had to perfect the fit. Laid out the design with a wax pencil. Bandsawed the curve then cleaned up with a spokeshave. After drilling the holes and cleaned the Jatoba with Acetone and glued on the tenon an...

Read this entry »

« prev 1 2 3 4 5 ... 130 next »
1300 entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics