LumberJocks

Woodworking blog entries tagged with 'pip'

  • Advertise with us
View JohnMcClure's profile

Princess Daybed for Daughter #3: Stock prep and mortising

07-10-2018 12:24 PM by JohnMcClure | 0 comments »

I picked up two douglas fir 4×4s and two SYP 2×10s. One of those 2×10s contained three bottom rails (long back rail, two short side rails). The front rail is going to be thinner, 3/4”, to minimize shin-smashing risk; so it should be hardwood.How about this, from the pile under the tarp?You’ll see.Once that’s planed down and the rotten section trimmed out, it looks like this:Now I have a stack of boards cut to rough length, a bit overlong. It’s not the wh...

Read this entry »


View Tim Dorcas's profile

Building a Light Box/Light Tent #1: Building a Light Box

11-10-2008 07:12 AM by Tim Dorcas | 4 comments »

In another life, photography was my hobby. (You can check out some of my photographs here.) While I have created lots of projects that I wanted to upload, everytime I tried to take pictures of them, they would come out like crap. You can still see examples of this in my earlier projects. I initially was going to buy a light tent just to improve the quality of my projects to upload. I went to a couple of local photo shops but the least expensive kit started at $149. Walmart had a kit for$70...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com