I was looking online for rustic wood for a cabinet I want to build and came upon Tule Peak Timber. My wife and I drove out to see what they had to offer and were very pleased. Rob, the owner was very helpful in explaining the different types of wood and what would work best for us. He told us about Lumberjocks.com and suggested we join because it would be very helpful. I really appreciate Rob taking his time to help us out. I saw some of the work he’s done and it looked like high end q...
Hit the Busy Beaver today and bought all the lumber I need to make the 14 minute sawhorses. Right now it is all stacked up in Bill’s shed—tomorrow I will go over and use his table saw to cut all the lengths I need. It’s all pine, construction grade 2×4s. The guy in the lumber yard and I went through it all piece by piece picking out lengths that will be decent. Two of the pieces are really nice—I’ll use those for the I-beams, so that the tops wi...
Note: not only is the box in progress, this post is as well.. I hope to add more to it. After experimenting with basic box making I finally have one going that I’m satisfied with. This is my fourth box and my first with a lid. I’ll be trying something me for me to finish the box.. I’m going to try a two in one product.. I think it’s called ‘Poly Shades’ by Minwax. Top Side Profile Sliding Lid Bottom Raised Lid
After the final phase of glue up for the legs, putting the top on was a piece of cake. Clamp, countersink, screw, (so it can be adjusted if ever necessary) and this puppy is ready for work. Well, it’s ready for it’s close up,... then work (or play) depending on your perspective. Goodbye workmate, Hello, nurse! I left in that metal plate on the ends. For looks and added weight. Plus it makes a handy chisel holder! As you can see by the outsid...
I spent, (what started off as) a nice cool Saturday morning, cutting and fitting the mortise and tenons for the base. Since I cut the tenons by hand, I figured I’d break out the brace and bit I inherited to drill out most of the waste for the mortices…. Not for a lack of trying, but I just couldn’t get it to hold the bits… so I moved over to the shopsmith. It was still set up in drillpress mode afterall. Aligned the table height and fence, and two seconds later I ha...
I wasn’t totally happy with the former workbench, turned lathe stand. So, when we moved, I re-purposed that to be the outfeed table for my table saw, and set about planning a new one for my mini lathe. I had a couple plans that I’d almost made – but would have had to buy or salvage the right pieces. One was a great, and HEAVY, made with plywood and filled with sand. Twice, I almost started that one… but the idea of something lighter with properly splayed legs appeal...
Just wanted to share with all my LumberJock friends a new post I just put up on my blog about how I surface my end-grain cutting boards on my router table. I know there are a lot of ways but I have been doing this way for a while and it work pretty good or if its a big board I use a router and some rails and a sled on my base. Stop my my site and check it out and let know what you thing and if you got any ideas on how to tweak I’m alway interested in learning a new trick just leave me a...
In conjunction with a bunch of other guys on another forum, we are putting together a group build of a tube guitar amp. My contribution will be a raw, unfinished, rough sanded cabinet for the amp. We finally got the dimensions nailed down to where I could make a prototype. The project gave me a chance to use my new TS box joint jig (Shop Notes version). I have a bunch of 16’ rough cut pine 1×12’s. So I lopped off 2 lengths long enough to do 1 long side and 1 short side...
In this episode I start working on 4 bookends. After all the parts are jointed I laminate 2 blocks together to make a 3 in thick letter for each book end. Then I cut out the letters on the scroll saw.
- My Journey As A Scroll Saw Pattern Designer - 1199 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 67 parts
- As The Lathe Turns - 67 parts
- Sheila Landry (scrollgirl) - 1221 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 333 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 209 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 146 entries