LumberJocks

Woodworking blog entries tagged with 'pics'

  • Advertise with us
View JustaLilJoinery's profile

Making progress - Making connections

08-06-2013 07:50 AM by JustaLilJoinery | 4 comments »

Hi all, I’m Jyl.I’m obviously new here and appreciate anyone who decides it is worthy of your time to read.I am a lover of wood, building, being creative and all things small. I came back to creating with wood (and other materials) because of a health issue. I’ve found that many other hobby-workers have also had this experience so you might notice that I mention it here and there. I will certainly try to not come off as a whiner but please understand as you get to know ...

Read this entry »


View degoose's profile

Updated shed photographs...

01-01-2013 08:23 PM by degoose | 29 comments »

Just a few shot of the workshop after a major reshuffle of the equipment to fit the laser…

Read this entry »


View CaptainSkully's profile

Kite Camera Reel #8: The Reel Deal...

11-26-2009 08:10 PM by CaptainSkully | 5 comments »

Here’s the kitecam footage with a little background music. If you want a funnier/naughtier version, browse to YouTube by clicking the link at the bottom right and look at our other videos (Warning: Explicit). Remember, I warned you. Little pitchers… We’re flying to the British Virgin Islands tonight! I’ll post some more video of exotic locales. Happy Thanksgiving to all of my fellow LJ’s and their families.

Read this entry »


View CaptainSkully's profile

Kite Camera Reel #7: Reel Progress...

11-26-2009 05:43 AM by CaptainSkully | 5 comments »

Not much to say. I’ve got some video editing stuff to figure out (upside down footage – camera is currently dangling upside down underneath the rig – and how to play some sappy sailing music in the background), but otherwise it was a success. I’m going to coat all the parts with three coats of Arm-R-Seal to try to keep the saltwater out. Wait until you see the footage from the kitecam!

Read this entry »


View CaptainSkully's profile

Kite Camera Reel #6: Lighten Up!

11-25-2009 02:14 AM by CaptainSkully | 5 comments »

Here’s the two reels after I strategically removed about half the wood. It’s still strong, but a whole lot lighter to stuff into the luggage. We’ve addressed the canting keel problem of the camera, and we got our camera/enclosure in the mail today, so I think we’re set. I figured out how to invert .avi video, so we’re going to hang the camera upside down from the middle of the parallel linkage. Tomorrow, we’re going to jump on a boat for an hour and...

Read this entry »


View CaptainSkully's profile

Kite Camera Reel #5: Wright Brothers, Eat Your Hearts Out!

11-24-2009 07:09 PM by CaptainSkully | 7 comments »

So today after sailing lessons, we used the boat to “test drive” our contraption. The kite flew very well on just 4 knots under motor, but we had to tweak the lines a bit to get it to fly horizontally. We discussed that the kite can only be flown while we’re going upwind, but that still gives us lots of leeway. The reel performed very well, especially the two speed handles. As you can see, I’m in the process of lightening the reel by drilling holes. We’r...

Read this entry »


View CaptainSkully's profile

Kite Camera Reel #4: Almost Done!

11-18-2009 04:21 AM by CaptainSkully | 1 comment »

I was able to squeeze another day in the shop. We started out by finishing up the parallel linkage with the barrel bolts we got from the hardware store. Then we fabricated the Brooxe hanger and the camera enclosure mount. Finally, it was time for the handles. ^ Handles installed on the reel assembly ^ Camera enclosure mounted on the bottom of the parallel linkage ^ Brooxe hanger showing how kite string winds around the “mushrooms” in the top member of the parallel l...

Read this entry »


View CaptainSkully's profile

Kite Camera Reel #3: A Day's Progress...

11-14-2009 05:18 PM by CaptainSkully | 5 comments »

I finally got another day in the shop. We’re starting to run out of time. We leave in two weeks for the BVI and I’ve got sailing lessons almost every day until then. Regardless, we ran over to Rockler to get some knobs early in the morning (I gave my lathe to my buddy Eric when we moved to CA). We got back and made some progress: ^ Here’s the reel assembly put together with the hardware and knobs. Notice the knobs give you two options, slow, with torque, or fast...

Read this entry »


View CaptainSkully's profile

Kite Camera Reel #1: Day 1: No Rush...

10-30-2009 05:49 PM by CaptainSkully | 2 comments »

I have a buddy who won a sailboat charter in the British Virgin Islands. I started off promising him to teach him how to sail well enough to go on his own. Long story short, we ended up chartering a sailboat too. The other night (over a few adult beverages), he said he wanted to build a camera kite. For those of you that don’t know what the heck he’s talking about, it’s a contraption that allows you to literally fly your expensive, digital camera, usually over the Pacifi...

Read this entry »


View jockmike2's profile

would not let me load unless I wrote something here

04-30-2007 09:39 PM by jockmike2 | 4 comments »

I finally finished my aprons as far as the scrollwork goes. It took me 2 weeks to cut out the design on the aprons due to my back. A few minutes at a time. I did something different, taking the Green and Green attraction to oriental themes, I took them literally in my design. Time consuming on that Dremel. Time I really did’nt have, so now I’m pressed on the rest of the poject. However, I still think I can pull it off. I am making a home made coping sled to cut all my tenons. Then...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com